BSD-3-Clause licensed by Jonas Carpay
Maintained by [email protected]
This version can be pinned in stack with:apecs-physics-0.4.5@sha256:8d0bcebc56465d7dc7a0e96924c4a33813c14bb06bc1c48792fcd4f501987d44,2798

Module documentation for 0.4.5

apecs-physics

2D physics library for apecs. Uses the Chipmunk physics engine. The apecs-gloss package provides a simple optional gloss-based renderer.

Feel free to create an issue or PR for suggestions/questions/requests/critiques/spelling fixes/etc. See TODO.md for suggestions if you want to help out with the code.

The examples directory contains a number of examples, each can be run with stack build && stack <examplename>:

helloworld

Screenshot

makeWorld "World" [''Physics, ''BodyPicture, ''Camera]

Generate a world. The Physics component adds a physics space to the world. The BodyPicture contains a gloss Picture, which the renderer will match to the Body’s position and orientation. The Camera component tracks a camera position and zoom factor.

initialize = do
  set global ( Camera (V2 0 1) 60
             , earthGravity )

Globals can be set with any entity argument, global is just an alias for -1. earthGravity = V2 0 (-9.81), normal earth surface gravity if we assume normal MKS units. Note that the positive y-axis points upwards.

  let ballShape = cCircle 0.5
  newEntity ( DynamicBody
            , Shape ballShape
            , Position (V2 0 3)
            , Density 1
            , Elasticity 0.9
            , BodyPicture . color red . toPicture $ ballShape )

Still in the initialize function, here we see our first object being instantiated. The type of ballShape is Convex, the apecs-physics format for shapes. Convex is a convex polygon, consisting of a number of vertices and a radius. In the case of a circle, the polygon consists of a single point with a non-zero radius. Both Chipmunk and gloss only support convex polygons, Convex is used to give them a common interface.

A DynamicBody is one of three types of bodies. It is a normal body, fully affected by physical forces. The elasticity of a collision is the product of the elasticities of the colliding shapes.

The final line shows how to do rendering. BodyPicture expects a gloss Picture, in this case we derive one from ballShape :: Convex using toPicture. color red comes from gloss, and is just one of the many Picture manipulation functions. Alternatively, you can use a Bitmap to use actual sprites.

  let lineShape = hLine 6
  newEntity ( StaticBody
            , Angle (-pi/20)
            , Shape lineShape
            , Elasticity 0.9
            , BodyPicture . color white . toPicture $ lineShape )

Static bodies are not affected by physics, and generally rarely move. They are equivalent to bodies with infinite mass and moment, and zero velocity. Changing their position triggers an explicit rehash of their shapes, wish is relatively expensive.

main = do
  w <- initWorld
  runSystem initialize w
  defaultSimulate w

defaultSimulate is a convenience wrapper around gloss’ simulateIO. You can find its definition in Apecs.Physics.Gloss, in case you want to change the rendering behavior.

tumbler

Screenshot

initialize :: System World ()
initialize = do
  set global ( Camera 0 50
             , earthGravity )

  let sides = toEdges $ cRectangle 5
  tumbler <- newEntity ( KinematicBody
                       , AngularVelocity (-1)
                       , BodyPicture . color white . foldMap toPicture $ sides )

As previously stated, both Chipmunk and gloss exclusively have convex polygon primitives. Our tumbler, however, is obiously not convex. Fortunately, composing shapes is really easy. We use toEdges to turn a rectangle into an outline of one, and use foldMap to make a composite Picture.

A KinematicBody is halfway between a DynamicBody and a StaticBody. It can have an (angular) velocity, but will not respond to forces. It can be used for e.g. moving platforms, or in this case. Note that we did not add any shapes to the tumbler yet.

  forM_ sides $ \line -> newEntity (ShapeExtend (cast tumbler) $ setRadius 0.05 line)

The time has come to talk about the destinction between shapes and bodies. A body can have multiple shapes. Shapes belonging to the same body cannot move relative to one another, i.e. a body is a fixture for multiple shapes. When using the normal Shape data constructor to add a shape to a body, we actually create two Chipmunk structs; one for the body, and one for the shape, even though they are addressed by the same entity in apecs.

When we want to add multiple shapes to a body, however, we need to make new entities for each individual shape. The reason for this is that this way, we can still easily change the properties of each individual shape. Shape actually just represents a special case of ShapeExtend, the case in which the body has the same entity as the shape.

When you use a tuple of components in apecs, they are added in the order you list them in the tuple. This is important to realize, as adding a shape to an entity wihout a body is a noop. Always make sure you first add a body, and then the shapes. This also comes up when e.g. setting a shape’s properties: you can only set a shape’s Mass or Density when there is a shape in the first place. If you don’t, you will get a runtime error about simulating zero-mass DynamicBodies.

  replicateM_ 200 $ do
    x <- liftIO$ randomRIO (-2, 2)
    y <- liftIO$ randomRIO (-2, 2)
    r <- liftIO$ randomRIO (0.1, 0.2)
    let ballshape = cCircle r
    let c = (realToFrac x+2)/3
    newEntity ( DynamicBody
              , Position (V2 x y)
              , Shape ballshape
              , BodyPicture . color (makeColor 1 c c 1) . toPicture $ ballshape
              , Density 1 )

  return ()

Finally, we randomly add a bunch of balls.

constraints

Screenshot

The final example is a gallery of (some of) the available constraints. Drag shapes around with the left mouse button, create a new box with the right.

This example is too large to fully include here, but if you have made it this far, I recommend looking at the source. Aside from demonstrating constraints, queries and interaction it also contains some neat tricks like:

let rubber = (Friction 0.5, Elasticity 0.5, Density 1)
newEntity ( DynamicBody
          , someShape
          , rubber )

Nesting tuples creates composable and reusable pieces of configuration (this is an apecs thing, not an apecs-physics thing). This can also be useful if you find yourself needing bigger tuples than the current maximum.

Constraints are a lot like shapes, but instead of having one associated Body, they have two. It also comes in the varieties Constraint and ConstraintExtend.

Dragging an object with the mouse is also done using a constraint. The mouse position actually controls the position of a static body without shapes, and we use a PinJoint to attach whatever we are dragging to it.

Changes

[0.4.5]

Changed

  • (#78) Chipmunk bumped to v7.0.3, fixes the sysctl.h deprecation reported in #77

[0.4.4]

Changed

  • Increased upper bound apecs dependency

[0.4.3]

Added

  • addPostStepCallback

Changed

  • Now runs in MonadIO rather than IO

[0.4.2]

Added

  • Query Impulse for Constraints
  • Exposed the CollisionType Component

Changed

  • Fixed ConstraintList to actually yield constraints instead of shapes

[0.4.1]

Changed

  • Fix Point Query bug, should no longer give memory issues

[0.4.0]

Added

  • You now have access to colliding shapes in a Collision

[0.3.2]

Changed

  • Fixed links and added changelog to cabal file
  • Added version bounds for dependencies
  • Expanded haddocks

[0.3.1]

Changed

  • added apecs version bound

[0.3.0]

Added

  • ShapeList and ConstraintList components for bodies, that contain a list of entity indices of their shapes and constraints (read-only).

Changed

  • Shapes, Constraints, and CollisionHandlers now track their original Haskell representations, and can be meaningfully read.
  • Shape and Constraint now only have a single constructor, that explicitly takes an entity argument indicating what entity it belongs to. Previously, the interface suggested that shapes and constraints were properties of bodies, which was wrong.
  • Bodies now track their shapes and constraints in /mutable/ stores

Removed

  • The ShapeBody component has been removed. You can find out a shapes body by reading the Shape component’s ShapeExtend constructor directly.