The rio library

A standard library for Haskell

Rio

Build Status

The goal of the rio library is to make it easier to adopt Haskell for writing production software. It is intended as a cross between:

  • Collection of well designed, trusted libraries
  • Useful Prelude replacement
  • A set of best practices for writing production quality Haskell code

This repository contains the rio library and other related libraries, such as rio-orphans. There is a tutorial on how to use rio available on FP Complete’s Haskell site. This README discusses project goals and collects other reference information.

Standard library

While GHC ships with a base library, as well as a number of other common packages like directory and transformers, there are large gaps in functionality provided by these libraries. This choice for a more minimalistic base is by design, but it leads to some unfortunate consequences:

  • For a given task, it’s often unclear which is the right library to use
  • When writing libraries, there is often concern about adding dependencies to any libraries outside of base, due to creating a heavier dependency footprint
  • By avoiding adding dependencies, many libraries end up reimplementing the same functionality, often with incompatible types and type classes, leading to difficulty using libraries together

This library attempts to define a standard library for Haskell. One immediate response may be XKCD #927:

XKCD Standards

To counter that effect, this library takes a specific approach: it reuses existing, commonly used libraries. Instead of defining an incompatible Map type, for instance, we standardize on the commonly used one from the containers library and reexport it from this library.

This library attempts to define a set of libraries as “standard,” meaning they are recommended for use, and should be encouraged as dependencies for other libraries. It does this by depending on these libraries itself, and reexporting their types and functions for easy use.

Beyond the ecosystem effects we hope to achieve, this will hopefully make the user story much easier. For a new user or team trying to get started, there is an easy library to depend upon for a large percentage of common functionality.

See the dependencies of this package to see the list of packages considered standard. The primary interfaces of each of these packages is exposed from this library via a RIO.-prefixed module reexporting its interface.

Prelude replacement

The RIO module works as a prelude replacement, providing more functionality and types out of the box than the standard prelude (such as common data types like ByteString and Text), as well as removing common “gotchas”, like partial functions and lazy I/O. The guiding principle here is:

  • If something is safe to use in general and has no expected naming conflicts, expose it from RIO
  • If something should not always be used, or has naming conflicts, expose it from another module in the RIO. hierarchy.

Best practices

Below is a set of best practices we recommend following. You’re obviously free to take any, all, or none of this. Over time, these will probably develop into much more extensive docs. Some of these design decisions will be catered to by choices in the rio library.

For Haskellers looking for a set of best practices to follow: you’ve come to the right place!

Import practices

This library is intended to provide a fully loaded set of basic functionality. You should:

  • Enable the NoImplicitPrelude language extension (see below)
  • Add import RIO as your replacement prelude in all modules
  • Use the RIO.-prefixed modules as necessary, imported using the recommended qualified names in the modules themselves. For example, import qualified RIO.ByteString as B. See the module documentation for more information.
  • Infix operators may be imported unqualified, with a separate import line if necessary. For example, import RIO.Map ((?!), (\\)). Do this only if your module contains no overlapping infix names, regardless of qualification. For instance, if you are importing both RIO.Map.\\ and RIO.List.\\ do not import either one unqualified.

In the future, we may have editor integration or external tooling to help with import management.

Language extensions

Very few projects these days use bare-bones Haskell 98 or 2010. Instead, almost all codebases enable some set of additional language extensions. Below is a list of extensions we recommend as a good default, in that these are:

  • Well accepted in the community
  • Cause little to no code breakage versus leaving them off
  • Are generally considered safe

Our recommended defaults are:

AutoDeriveTypeable
BangPatterns
BinaryLiterals
ConstraintKinds
DataKinds
DefaultSignatures
DeriveDataTypeable
DeriveFoldable
DeriveFunctor
DeriveGeneric
DeriveTraversable
DoAndIfThenElse
EmptyDataDecls
ExistentialQuantification
FlexibleContexts
FlexibleInstances
FunctionalDependencies
GADTs
GeneralizedNewtypeDeriving
InstanceSigs
KindSignatures
LambdaCase
MonadFailDesugaring
MultiParamTypeClasses
MultiWayIf
NamedFieldPuns
NoImplicitPrelude
OverloadedStrings
PartialTypeSignatures
PatternGuards
PolyKinds
RankNTypes
RecordWildCards
ScopedTypeVariables
StandaloneDeriving
TupleSections
TypeFamilies
TypeSynonymInstances
ViewPatterns

Notes on some surprising choices:

  • RecordWildCards is really up for debate. It’s widely used, but rightfully considered by many to be dangerous. Open question about what we do with it.
  • Despite the fact that OverloadedStrings can break existing code, we recommend its usage to encourage avoidance of the String data type. Also, for new code, the risk of breakage is much lower.
  • MonadFailDesugaring helps prevent partial pattern matches in your code, see #85

Due to concerns about tooling usage (see issue #9), we recommend adding these extensions on-demand in your individual source modules instead of including them in your package.yaml or .cabal files.

There are other language extensions which are perfectly fine to use as well, but are not recommended to be turned on by default:

CPP
TemplateHaskell
ForeignFunctionInterface
MagicHash
UnliftedFFITypes
TypeOperators
UnboxedTuples
PackageImports
QuasiQuotes
DeriveAnyClass
DeriveLift
StaticPointers

GHC Options

We recommend using these GHC complier warning flags on all projects, to catch problems that might otherwise go overlooked:

  • -Wall
  • -Wcompat
  • -Widentities
  • -Wincomplete-record-updates
  • -Wincomplete-uni-patterns
  • -Wpartial-fields
  • -Wredundant-constraints

You may add them per file, or to your package.yaml, or pass them on the command line when running ghc. We include these in the project template’s package.yaml file.

For code targeting production use, you should also use the flag that turns all warnings into errors, to force you to resolve the warnings before you ship your code:

  • -Werror

Further reading:

  • Alexis King explains why these are a good idea in her blog post which was the original inspiration for this section.
  • Max Tagher gives an in-depth overview of these flags, and more, in his blog post.

Monads

A primary design choice you’ll need to make in your code is how to structure your monads. There are many options out there, with various trade-offs. Instead of going through all of the debates, we’re going to point to an existing blog post, and here just give recommendations.

  • If your code is going to perform I/O: it should live in the RIO monad. RIO is “reader IO.” It’s the same as ReaderT env IO, but includes some helper functions in this library and leads to nicer type signatures and error messages.

  • If you need to provide access to specific data to a function, do it via a typeclass constraint on the env, not via a concrete env. For example, this is bad:

    myFunction :: RIO Config Foo
    

    This is good:

    class HasConfig env where
      configL :: Lens' env Config -- more on this in a moment
    myFunction :: HasConfig env => RIO env Foo
    

    Reason: by using typeclass constraints on the environment, we can easily compose multiple functions together and collect up the constraints, which wouldn’t be possible with concrete environments. We could go more general with mtl-style typeclasses, like MonadReader or MonadHasConfig, but RIO is a perfect balance point in the composability/concreteness space (see blog post above for more details).

  • When defining Has-style typeclasses for the environments, we use lenses (which are exposed by RIO) because it provides for easy composability. We also leverage superclasses wherever possible. As an example of how this works in practice:

    -- Defined in RIO.Logger
    class HasLogFunc env where
      logFuncL :: Lens' env LogFunc
    
    class HasConfig env where
      configL :: Lens' env Config
    instance HasConfig Config where
      configL = id
    
    data Env = Env { envLogFunc :: !LogFunc, envConfig :: !Config }
    class (HasLogFunc env, HasConfig env) => HasEnv env where
      envL :: Lens' env Env
    instance HasLogFunc Env where
      logFuncL = lens envLogFunc (\x y -> x { envLogFunc = y })
    instance HasConfig Env where
      configL = lens envConfig (\x y -> x { envConfig = y })
    instance HasEnv Env where
      envL = id
    
    -- And then, at some other part of the code
    data SuperEnv = SuperEnv { seEnv :: !Env, seOtherStuff :: !OtherStuff }
    instance HasLogFunc SuperEnv where
      logFuncL = envL.logFuncL
    instance HasConfig SuperEnv where
      configL = envL.configL
    instance HasEnv SuperEnv where
      envL = lens seEnv (\x y -> x { seEnv = y })
    
  • If you’re writing code that you want to be usable outside of RIO for some reason, you should stick to the good mtl-style typeclasses: MonadReader, MonadIO, MonadUnliftIO, MonadThrow, and PrimMonad. It’s better to use MonadReader+Has than to create new typeclasses like MonadLogger, though usually just sticking with the simpler RIO env is fine (and can easily be converted to the more general form with liftRIO). You should avoid using the following typeclasses (intentionally not exposed from this library): MonadBase, MonadBaseControl, MonadCatch, and MonadMask.

Exceptions

For in-depth discussion, see safe exception handling. The basic idea is:

  • If something can fail, and you want people to deal with that failure every time (e.g., lookup), then return a Maybe or Either value.
  • If the user will usually not want to deal with it, then use exceptions. In the case of pure code, use a MonadThrow constraint. In the case of IO code: use runtime exceptions via throwIO (works in the RIO monad too).
  • You’ll be upset and frustrated that you don’t know exactly how some IO action can fail. Accept that pain, live with it, internalize it, use tryAny, and move on. It’s the price we pay for async exceptions.
  • Do all resource allocations with functions like bracket and finally.

It’s a good idea to define an app-wide exception type:

data AppExceptions
  = NetworkChangeError Text
  | FilePathError FilePath
  | ImpossibleError
  deriving (Typeable)

instance Exception AppExceptions

instance Show AppExceptions where
  show =
    \case
      NetworkChangeError err -> "network error: " <> (unpack err)
      FilePathError fp -> "error accessing filepath at: " <> fp
      ImpossibleError -> "this codepath should never have been executed. Please report a bug."

Strict data fields

Make data fields strict by default, unless you have a good reason to do otherwise.

Project template

We provide a project template which sets up lots of things for you out of the box. You can use it by running:

$ stack new projectname rio

Safety first

This library intentionally puts safety first, and therefore avoids promoting partial functions and lazy I/O. If you think you need lazy I/O: you need a streaming data library like conduit instead.

When to generalize

A common question in Haskell code is when should you generalize. Here are some simple guidelines. For parametric polymorphism: almost always generalize, it makes your type signatures more informative and functions more useful. In other words, reverse :: [a] -> [a] is far better than reverse :: [Int] -> [Int].

When it comes to typeclasses: the story is more nuanced. For typeclasses provided by RIO, like Foldable or Traversable, it’s generally a good thing to generalize to them when possible. The real question is defining your own typeclasses. As a general rule: avoid doing so as long as possible. And if you define a typeclass: make sure its usage can’t lead to accidental bugs by allowing you to swap in types you didn’t expect.

Module hierarchy

The RIO.Prelude. module hierarchy contains identifiers which are reexported by the RIO module. The reason for this is to make it easier to view the generated Haddocks. The RIO module itself is intended to be imported unqualified, with NoImplicitPrelude enabled. All other modules are not reexported by the RIO module, and will document inside of them whether they should be imported qualified or unqualified.

Changes

Changelog for rio

0.1.19.0

  • Expose fromLeft and fromRight

0.1.18.0

  • Add colours to the LogOption constructor #222

0.1.17.0

  • Expose Bifunctor, Bifoldable, and Bitraversable.
  • The first and second functions exported by RIO formerly originated from Control.Arrow. They now come from Bifunctor.

0.1.16.0

  • Expand the number of microlens functions exported by the RIO prelude.
  • Add new module RIO.Lens which provides the rest of microlens.

0.1.15.1

  • Replace canonicalizePath with makeAbsolute #217

0.1.15.0

  • Include source in log messages

0.1.14.1

  • Support unliftio-core 0.2

0.1.14.0

  • Addition of mkSimpleApp
  • Addition of lookupEnvFromContext

0.1.13.0

  • Add withLazyFileUtf8
  • Add mapRIO
  • Add generic logger
  • Add exeExtensions and improve findExecutable on Windows #205

0.1.12.0

  • Add logFormat and setLogFormat for LogOptions.

0.1.11.0

  • Replace atomic and durable file writing functions with the ones from unliftio, see #167

0.1.10.0

  • Relax a bunch of RIO.File functions from MonadUnliftIO to MonadIO
  • Custom Monoid instance for Utf8Builder that matches semantics of the derived one, but doesn’t break list fusion
  • Qualified import recommendations for *.Partial, *.Unchecked, *.Unsafe
  • Re-export Data.Ord.Down from RIO.Prelude
  • Addition of RIO.NonEmpty module
  • Addition of RIO.NonEmpty.Partial module
  • Export NonEmpty type and its constructor (:|) from RIO.Prelude.Types
  • Fix handling of non-ASCII characters in logSticky
  • Deprecate withProcess and withProcess_, add withProcessWait, withProcessWait_, withProcessTerm, and withProcessTerm_

0.1.9.2

  • Bring back re-export of Monad.fail from RIO.Prelude.

0.1.9.1

  • Remove accidental reexport of Control.Applicative.empty introduced in the previous release.
  • Functions from Data.Data.Data class are brought to the re-export list as well.

0.1.9.0

  • Add Prelude.Exit to export lifted versions of the exit functions from System.Exit.
  • Re-export the Control.Monad.State.State and Control.Monad.State.StateT types and related computation functions in RIO.State.
  • Re-export the Control.Monad.Writer.Writer and Control.Monad.Writer.WriterT types and related computation functions in RIO.Writer.
  • Re-export pred, succ in RIO.Partial.
  • Add Semigroup and Monoid instances for RIO
  • Add the Deque double-ended queue data type
  • Re-export Data.Map.Strict.toAscList and Data.Map.Strict.toDescList from RIO.Map.
  • Re-export Data.Sequence.Seq from RIO.
  • Addition of RIO.Prelude module
  • Addition of RIO.Prelude.Types module
  • Re-export zipWith and runST from RIO.Prelude
  • Re-export Exception, MonadFail, Typeable and ST from RIO.Prelude.Types
  • Switch to MonadFail.fail from Monad.fail and re-exported it from RIO.Prelude

0.1.8.0

  • Re-export Control.Monad.State.modify, Control.Monad.State.modify' and Control.Monad.State.gets in RIO.State

0.1.7.0

  • Addition of textDisplay to Display class.

0.1.6.0

  • Changed logUseColor to default to False on Windows, even when verbose and on the terminal
  • Add RIO.File module which offers a family of file handling functions (withBinaryFileDurable, withBinaryFileDurableAtomic, among others.) with better durability and atomicity guarantees

0.1.5.0

  • Re-export Numeric.Natural.Natural #119
  • Re-export Data.Functor.<&> from GHC 8.4+, falling back local definition for base < 4.11 #117
  • Re-export Data.Proxy.Proxy(..)
  • Re-export fromEnum from RIO, export toEnum, read and fromJust from RIO.Partial
  • Add noLogging function to skip logging on specific sub-routines
  • Re-export Control.Category.>>>

0.1.4.0

  • Add Const and Identity
  • Add Reader and runReader
  • Add instances for MonadWriter and MonadState to RIO via mutable reference #103

0.1.3.0

  • Add newLogFunc function to create LogFunc records outside of a callback scope
  • Allow dynamic reloading of logMinLevel and logVerboseFormat for the LogOptions record
  • Add foldMapM
  • Add headMaybe, lastMaybe, tailMaybe, initMaybe, maximumMaybe, minimumMaybe, maximumByMaybe, minimumByMaybe functions to RIO.List module (issue #82)
  • Move non partial functions scanr1 and scanl1 from RIO.List.Partial to RIO.List (issue #82)
  • Add SimpleApp and runSimpleApp
  • Add asIO

0.1.2.0

  • Allow setting usage of code location in the log output

0.1.1.0

  • Move some accidentally included partial functions

0.1.0.0

  • Initial stable release

0.0

NOTE All releases beginning with 0.0 are considered experimental. Caveat emptor!