This package provides a type for storing numbers in the log-domain, primarily useful for preventing underflow when multiplying many probabilities as in HMMs and other probabilistic models. The package also provides modules for dealing with floating numbers correctly.
As of version 0.13.3, we’ve dropped support for Hugs and GHC < 7.8. Nothing major has changed, so they should still work; it’s just that they’re no longer officially supported. (In practice, GHC 7.6 still works just fine, and is still being tested against. It’s just that this support will be droped in the future, once it becomes a burden.) Thus, this version of the library provides a transitional point between backwards compatability and adding new features (see below).
Note that the GitHub repository is just a clone of the Darcs repo. I’m testing out whether to switch things over to GitHub in order to use TravisCI, and an official ticket tracker, etc.
In general, this is a simple package and should be easy to install. The specifics are a bit murky however, since we use CPP and the FFI and want to retain portability, and due to the rapid evolution of Cabal and other development tools. You should be able to use one of the following standard installation methods:
-- With cabal-install and without the source: $> cabal install logfloat -- With cabal-install and with the source already: $> cd logfloat $> cabal install -- Without cabal-install, but with the source already: $> cd logfloat $> runhaskell Setup.hs configure --user $> runhaskell Setup.hs build $> runhaskell Setup.hs haddock --hyperlink-source $> runhaskell Setup.hs copy $> runhaskell Setup.hs register
The Haddock step is optional.
The logfloat package uses the FFI to access functions in libm to
improve accuracy. These functions are part of the ISO C 1999 standard
and are supported on most systems, however they’re not part of the
ANSI C standard nor the System V standard and so they might be
unavailable on some systems. If you encounter errors during build
about not being able to find
<math.h>, not having prototypes for
functions, or linking errors, then you are probably on such a system.
In order to use pure Haskell and disable the FFI, pass -f-useFFI during the configure phase to disable the useFFI flag. This will degrade the accuracy of certain operations, but should still compile cleanly.
If you run into errors like “error: ‘log1p’ redeclared as different kind of symbol” this is due to a bug in GHC 6.10.1 where you can’t use both -fvia-C and the FFI. This bug should be circumvented for the moment, but resolving it is still a work in progress. See the bug report (which is resolved in GHC 6.10.2):
The logfloat package builds and installs cleanly with GHC on Windows (without needing Cygwin nor Mingw/Msys), and the installed package can be used in compiled programs without any issues.
However, by default, the package does not work from the GHCi debugger
and gives errors like “can’t load .so/.DLL for: m (addDLL: could
not load DLL)”. This is a long-standing issue with GHCi having to
do with the fact that, on Windows, the so-called “libm” file does
not actually contain anything (as it does on POSIX) and the C
functions we use are instead placed in
libmingwex.a (which comes
bundled with GHC). The problem is that
ghc (the compiler) knows
to pull in
ghci (the interactive debugger)
does not. All of this is true at least as far back as Windows XP
and GHC 6.10.1. Some more information can be found in the ticket:
The most reliable workaround at this point, alas, is to compile the library with FFI support disabled in order to be able to use it in GHCi, and then to recompile with FFI enabled whenever you need to ship a compiled program.
A less-reliable workaround (i.e., needs to be tailored for your
system based on your paths, and you’ll need to have
which avoids the need for recompilation is to generate the DLL
yourself by running the following two commands and then placing the
m.dll into your path.
ar -x libmingwex.a gcc -shared *.o -o m.dll
If you want to run the test suite, use the following standard method
runhaskell Setup.hs in lieu of
cabal, if necessary):
$> cd logfloat $> cabal configure --enable-tests --enable-coverage $> cabal build $> cabal test --keep-tix-files
The results of the code coverage are in
you’re not interested in the coverage of the test suite, then you
needn’t pass the
Note that older versions of cabal used the flag name
--enable-library-coverage instead of
IIRC hpc integration in cabal was broken for ghc-7.6.
In Cabal 1.2 there is a bug in the handling of building Haddock documentation when CPP is involved. These issues have been fixed in Cabal 1.6, but here are the instructions if you’re on older systems.
In Cabal 1.2 the cpp-options field is not passed to Haddock, and therefore any macros defined there are not seen, which can cause Haddock to fail. The old workaround was to define CPP macros in the ghc-options field which does get passed to Haddock. This is now considered bad style and is forbidden by Hackage. It appears that passing –haddock-option=… or –ghc-option=… flags during configure does not have the same effect as defining the field.
Therefore, in order to properly compile Haddock documentation on Cabal 1.2, you should go into logfloat.cabal and uncomment the ghc-options fields which declare CPP macros -D__USE_FFI__ and -D__HUGS__=200609. If you know of a better workaround for this configuration, contact the maintainer.
Building for Hugs (September 2006)
If you’re feeling adventurous and want to try and get the library to compile under Hugs, here’s how you used to be able to compile things:
runhaskell Setup.hs configure --hugs \ --with-cpphs="`which cpphs-hugs`" \ --ffihugs-options="-98 +o" \ --ffihugs-option=-F'cpp -P -traditional -D__HUGS__=200609 -D__USE_FFI__' runhaskell Setup.hs build runhaskell Setup.hs copy runhaskell Setup.hs register
If you need to disable the FFI due to issues with not being able to find <math.h>, not having prototypes for functions, or linking errors, be sure not to pass -D__USE_FFI__ to the cpp filter for ffihugs.
Notably, Hugs installs cpphs under the name “cpphs-hugs” by default.
which command will try to resolve the location, assuming it’s
on your $PATH. If it isn’t, then change the –with-cpphs= flag to
point to where cpphs is installed on your system.
Some additional details about difficulties with building for Hugs can be found in this blog post and the bug reports:
http://winterkoninkje.livejournal.com/60707.html http://hackage.haskell.org/trac/hackage/ticket/526 http://hackage.haskell.org/trac/hackage/ticket/527
And while previous versions of Cabal could build this package (with the above commandline to work around those bugs), Hugs support is broken in Cabal 1.8 (including at least 188.8.131.52 through 184.108.40.206):
Changes: Version 0.13.3+ (2015-03-29) vs 0.12.1 (2010-03-19)
logFromLogFloat: that is, they all take/return
Doublenow. The change was made to help reduce the need for explicit type signatures. It shouldn’t really affect most users, since it seems noone was really making use of the polymorphism provided by previous versions. To get the previous behavior back, just explicitly add calls to
Fixed some instances to get them to compile under the new role-based type system of GHC 7.10
Cleaned up various extraneous rewrite rules, specializations, etc
Added the functions
pow. Both sum and product preserve more precision than the fold-based definitions in the Prelude. Moreover, sum is much faster than the Prelude version, since it only requires crossing the log/exp boundary n+1 times, instead of 2*(n-1) times. The only downside is that sum requires two passes over the input and thus is not amenable to list fusion.
(Version 0.13.3.2; 2015-08-06) Fixed the
Show LogFloatinstance to produce parentheses in the right place.
Upcoming changes (0.14+)
Data.Number.RealToFracmodule is no longer required by any of the others, it will probably be forked off to a separate package in order to improve portability of the rest of the package by removing the need for MPTCs.
There’s long been clamoring for adding a vector:
Data.Vector.Unboxed.Unboxinstance. I’ve been reluctant to add such an instance due to wanting to retain backwards compatibility and portability. Having dropped support for Hugs and older versions of GHC, I’m now willing to add them in.
The logfloat library is conceptually quite simple, and thus to whatever extent possible I’d still like to retain portability to non-GHC compilers. So if you are interested in using logfloat with another compiler/interpreter but run into problems (e.g., due to the type families required by the vector library), please get in touch and I’ll try to get things to work.
Compatibility / Portability
The package is compatible with GHC 7.8.3 and 7.10.1. It may still compile with older versions of GHC (or even Hugs!), however they are no longer officially supported.
The package is not compatible with nhc98 and Yhc because
Data.Number.RealToFrac uses MPTCs. However, that module is no
longer required by any others, and all the other modules should be
compatible with these compilers. Thus, it should be fairly easy to
port. If you do so, please let me know and I’ll try to incorporate
support for them.