shelltestrunner
Easy, repeatable testing of CLI programs/commands
https://github.com/simonmichael/shelltestrunner
LTS Haskell 22.39: | 1.10 |
Stackage Nightly 2024-10-31: | 1.10 |
Latest on Hackage: | 1.10 |
shelltestrunner-1.10@sha256:117ca45b3e37b21f4e341e2df764ba4f461229d45270bc0d13917a5e4c7dc87d,2501
Module documentation for 1.10
There are no documented modules for this package.
Install | Usage | Options | Test formats | Support/Contribute | Credits
shelltestrunner (executable: shelltest
) is a portable
command-line tool for testing command-line programs, or general shell
commands, released under GPLv3+. It reads simple test specifications
defining a command to run, some input, and the expected output,
stderr, and exit status. It can run tests in parallel, selectively,
with a timeout, in color, etc.
Install
There may be a new-enough packaged version on your platform. Eg:
Debian/Ubuntu: | apt install shelltestrunner |
Gentoo: | emerge shelltestrunner |
Or, build the latest release on any major platform:
stack: | get stack, stack install shelltestrunner-1.10 |
cabal: | cabal update; cabal install shelltestrunner-1.10 |
Usage
Here’s a test file containing three simple tests. They’re called “shell tests” because any shell command line can be tested. A test contains:
<
and one or more lines of input to be provided on stdin (optional)$
and the command line to test (required)- zero or more lines of expected stdout output, or a regexp (optional)
>2
and zero or more lines of expected stderr output, or a regexp (optional)>=
and an expected exit code, or a regexp (optional)
# 1. Test that the "echo" command (a shell builtin, usually)
# prints its argument on stdout, prints nothing on stderr,
# and exits with a zero exit code.
$ echo a
a
# 2. Test that echo with no arguments prints a blank line,
# no stderr output, and exits with zero.
# Since the output ends with whitespace, this time we must write
# the exit code test (>=) explicitly, to act as a delimiter.
$ echo
>=
# 3. Test that cat with a bad flag prints nothing on stdout,
# an error containing "unrecognized option" or "illegal option" on stderr,
# and exits with non-zero status.
$ cat --no-such-flag
>2 /(unrecognized|illegal) option/
>= !0
To run these tests:
$ shelltest examples.test
:examples.test:1: [OK]
:examples.test:2: [OK]
:examples.test:3: [OK]
Test Cases Total
Passed 3 3
Failed 0 0
Total 3 3
That’s the basics! There are also some alternate test formats you’ll read about below.
Options
shelltest 1.10
shelltest [OPTIONS] [TESTFILES|TESTDIRS]
Common flags:
-l --list List the names of all tests found
-i --include=PAT Include tests whose name contains this glob pattern
(eg: -i1 -i{4,5,6})
-x --exclude=STR Exclude test files whose path contains STR
-a --all Show all output without truncating, even if large
-c --color Show colored output if your terminal supports it
-d --diff Show differences between expected/actual output
-p --precise Show expected/actual output precisely, with quoting
--hide-successes Show only test failures
-f --fail-fast Only hspec: stop tests on first failure
--xmlout=FILE Save test results to FILE in XML format.
-D --defmacro=D=DEF Define a macro D to be replaced by DEF while parsing
test files.
--execdir Run tests from within each test file's directory
--extension=EXT File suffix of test files (default: .test)
-w --with=EXE Replace the first word of test commands with EXE
(unindented commands only)
-o --timeout=SECS Number of seconds a test may run (default: no limit)
-j --threads=N Number of threads for running tests (default: 1)
--shell=EXE The shell program to use (must accept -c CMD;
default: /bin/sh on POSIX, cmd.exe on Windows)
--debug Show debug info while running
--debug-parse Show test file parsing results and stop
Print test file:
--print[=FORMAT] Print test files in specified format (default: v3).
--hspec Use hspec to run tests.
-h --help Display help message
-V --version Print version information
--numeric-version Print just the version number
shelltest
accepts one or more test file or directory arguments.
A directory means all files below it named *.test
(customisable with --extension
).
By default, test commands are run with /bin/sh
on POSIX systems
and with CMD
on Windows; you can change this with the --shell
option.
By default, tests run in the directory in which you ran shelltest
;
with --execdir
they will run in each test file’s directory instead.
--include
selects only tests whose name (file name plus intra-file sequence number) matches a
.gitignore-style pattern,
while --exclude
skips tests based on their file path.
These can be used eg to focus on a particular test, or to skip tests intended for a different platform.
-D/--defmacro
defines a macro that is replaced by preprocessor before any tests are parsed and run.
-w/--with
replaces the first word of all test commands with something
else, which can be useful for testing alternate versions of a
program. Commands which have been prefixed by an extra space will
not be affected by this option.
--hide-successes
gives quieter output, reporting only failed tests.
Long flags can be abbreviated to a unique prefix.
For example, the command:
$ shelltest tests -i args -c -j8 -o1 -DCONF_FILE=test/myconf.cfq --hide
- runs the tests defined in any
*.test
file in or below thetests/
directory - whose names contain “
args
” - in colour if possible
- with up to 8 tests running in parallel
- allowing no more than 1 second for each test
- replacing the text “
CONF_FILE
” in all tests with “test/myconf.cfq
” - reporting only the failures.
Test formats
shelltestrunner supports three test file formats:
Format name | Description | Delimiters, in order |
---|---|---|
format 1 (deprecated) | command is first; exit status is required | (none) <<< >>> >>>2 >>>= |
format 2 (verbose) | input is first, can be reused; all but command can be omitted | <<< $$$ >>> >>>2 >>>= |
format 3 (preferred) | same as format 2 but with short delimiters | < $ > >2 >= |
To read each file, shelltestrunner tries the formats in this order: format 2, then format 3, then format 1. Within a file, all tests should use the same format.
Here are the formats in detail, from oldest to newest. You should use format 3; or if that clashes with your data, then format 2.
Format 1
This old format is included for backward compatibility with old tests.
Test files contain one or more individual tests, each consisting of a one-line shell command, optional input, expected standard output and/or error output, and a (required) exit status.
# COMMENTS OR BLANK LINES
COMMAND LINE
<<<
INPUT
>>>
EXPECTED OUTPUT (OR >>> /REGEXP/)
>>>2
EXPECTED STDERR (OR >>>2 /REGEXP/)
>>>= EXPECTED EXIT STATUS (OR >>>= /REGEXP/)
When not specified, stdout/stderr are ignored. A space before the command protects it from -w/–with.
Examples: shelltestrunner, Agda, berp, cblrepo.
Format 2
This is supported by shelltestrunner 1.9+. It improves on format 1 in two ways: it allows tests to reuse the same input, and it allows delimiters/test clauses to be omitted, with more useful defaults.
Test files contain one or more test groups. A test group consists of some optional standard input and one or more tests. Each test is a one-line shell command followed by optional expected standard output, error output and/or numeric exit status, separated by delimiters.
# COMMENTS OR BLANK LINES
<<<
INPUT
$$$ COMMAND LINE
>>>
EXPECTED OUTPUT (OR >>> /REGEX/)
>>>2
EXPECTED STDERR (OR >>>2 /REGEX/)
>>>= EXPECTED EXIT STATUS (OR >>>= /REGEX/ OR >>>=)
# COMMENTS OR BLANK LINES
ADDITIONAL TESTS FOR THIS INPUT
ADDITIONAL TEST GROUPS WITH DIFFERENT INPUT
All test parts are optional except the command line. If not specified, stdout and stderr are expected to be empty and exit status is expected to be zero.
Two spaces between $$$
and the command protects it from -w/–with.
The <<<
delimiter is optional for the first input in a file.
Without it, input begins at the first non-blank/comment line.
Input ends at the $$$
delimiter. You can’t put a comment before the first $$$
.
The >>>
delimiter is optional except when matching via regex.
Expected output/stderr extends to the next >>>2
or >>>=
if present,
or to the last non-blank/comment line before the next <<<
or $$$
or file end.
/REGEX/
regular expression patterns may be used instead of
specifying the expected output in full. The regex syntax is
regex-tdfa’s, plus
you can put !
before /REGEX/
to negate the match.
The exit status is a
number, normally 0 for a successful exit. This too can be prefixed
with !
to negate the match, or you can use a /REGEX/
pattern.
A >>>=
with nothing after it ignores the exit status.
Examples:
All delimiters explicit:
# cat copies its input to stdout
<<<
foo
$$$ cat
>>>
foo
# or, given a bad flag, prints a platform-specific error and exits with non-zero status
$$$ cat --no-such-flag
>>>2 /(unrecognized|illegal) option/
>>>= !0
# echo ignores the input and prints a newline.
# We need the >>>= (or a >>>2) to delimit the whitespace which
# would otherwise be ignored.
$$$ echo
>>>
>>>=
Non-required <<<
and >>>
delimiters omitted:
foo
$$$ cat
foo
$$$ cat --no-such-flag
>>>2 /(unrecognized|illegal) option/
>>>= !0
$$$ echo
>>>=
Format 3
This is supported by shelltestrunner 1.9+. It is the preferred format - like format 2 but with more convenient short delimiters:
# COMMENTS OR BLANK LINES
<
INPUT
$ COMMAND LINE
>
EXPECTED OUTPUT (OR > /REGEX/)
>2
EXPECTED STDERR (OR >2 /REGEX/)
>= EXPECTED EXIT STATUS (OR >= /REGEX/ OR >=)
# COMMENTS OR BLANK LINES
ADDITIONAL TESTS FOR THIS INPUT
ADDITIONAL TEST GROUPS WITH DIFFERENT INPUT
Examples:
All delimiters explicit:
# cat copies its input to stdout
<
foo
$ cat
>
foo
# or, given a bad flag, prints a platform-specific error and exits with non-zero status
$ cat --no-such-flag
>2 /(unrecognized|illegal) option/
>= !0
# echo ignores the input and prints a newline.
# We use an explicit >= (or >2) to delimit the whitespace which
# would otherwise be ignored.
$ echo
>
>=
Non-required <
and >
delimiters omitted:
foo
$ cat
foo
$ cat --no-such-flag
>2 /(unrecognized|illegal) option/
>= !0
$ echo
>2
Also: above, shelltestrunner, hledger.
Printing tests
The --print
option prints tests to stdout.
This can be used to convert between test formats.
Format 1, 2, and 3 are supported.
Here are some issues to be aware of when converting between formats:
- Printing v1 as v2/v3
- A
>>>= 0
often gets converted to a>>>2 //
or>2 //
, when>=
or nothing would be preferred. This is semantically accurate, because v1 ignores out/err by default, and v2/v3 check for zero exit by default, and therefore the safest conversion; but it’s annoying
- A
- Printing v3 as v3
- loses comments at the top of the file, even above an explicit < delimiter
- may lose other data
- A missing newline at EOF will not be preserved.
- v2/v3 allow shared input, but v1 does not
- A file containing only comments may be emptied
In general, always review the result of a conversion yourself before committing it.
Support/Contribute
Released version: | https://hackage.haskell.org/package/shelltestrunner |
Changelog: | https://hackage.haskell.org/package/shelltestrunner/changelog |
Code | https://github.com/simonmichael/shelltestrunner |
Issues | https://github.com/simonmichael/shelltestrunner/issues |
Chat | Contact sm in the #hledger:matrix.org room on matrix or the #hledger channel on libera.chat |
Feedback, testing, code, documentation, packaging, blogging, and funding are most welcome.
Credits
Simon Michael wrote shelltestrunner, inspired by John Wiegley’s tests for Ledger.
Code contributors: Andreas Abel, Andrés Sicard-Ramírez, Bernie Pope, Felix C. Stegerman, Iustin Pop, Jakob Schöttl John Chee. John Macfarlane, Sergei Trofimovich, Taavi Väljaots, Trygve Laugstøl,
shelltestrunner depends on several fine libraries, in particular Max Bolingbroke’s test-framework, and of course on the Glorious Haskell Compiler.
The Blade Runner font is by Phil Steinschneider.