encapsule

CLI tool to run developer containers, isolating your home directory and host from general effects inside the containers: “encapsules” a project and/or temp home dir together with select “capabilities”.

Originally derived from toolbox-constrained.

Run a (toolbox) container or image as an isolated podman container. Unlike with toolbox create, this does not bind-mount your home directory or integrate with the host by default. You can explicitly choose what dir(s) or file(s) to mount or features to enable, selecting user-configured “capabilities” that the encapsule container can access.

Most encapsule subcommands act on an image.

• If you wish to use an existing toolbox container as a starting point you can commit it to an “encapsule” container image.
  • Note your original toolbox container is left untouched: its system configuration and fs are just used as the base fs for the encapsule image (though its original bind mounts including $HOME will be not be included by default).
• Alternatively you can roll your own image or run a vanilla image like fedora (fedora:latest), fedora-toolbox:44 or ubuntu:latest, etc.
  • However toolbox images or containers are recommended because they include sudo and runuser, but as such it doesn’t have to be a toolbox container.
  • For example since the fedora base container does not include runuser it runs as --user root by default (since as of 0.5 util-linux is no longer installed by default into encapsule containers: this may be addressed in future).

Encapsule images and containers are prefixed by encapsule-. There is no need to use this prefix normally - it is implicit.

Usage

$ encapsule --version

0.5

$ encapsule --help

encapsule

Usage: encapsule [--version] COMMAND

  Run a toolbox image in an isolated podman container
  https://github.com/juhp/encapsule#readme

Available options:
  -h,--help                Show this help text
  --version                Show version

Available commands:
  list                     List encapsule images and containers
  list-caps                List available capabilities
  rm                       Remove an encapsule container
  rmi                      Remove an encapsule image
  stop                     Stop an encapsule container
  backup                   Create a tarball backup of a directory
  commit                   Commit an encapsule image from a container
  create                   Create an encapsule container
  enter                    Connect to a encapsule container
  run                      Run a temporary encapsule container

There are 3 main commands: run, create, and enter. run and create share many options.

run command

run starts a temporary encapsule container (removed on exit) from a (toolbox) image or container.

$ encapsule run --help

Usage: encapsule run IMAGE [-v|--volume HOST:CONTAINER[:opts]]
                     [-e|--env KEY[=VALUE]] [--path DIR] [-i|--init CMD]
                     [--cap NAME] [--pull] [--user USER]
                     [(-H|--home DIR[:opts]) [--backup-home]]
                     [(-p|--project DIR[:opts]) [--backup-project]]
                     [-n|--name NAME] [--readonly] [--no-network] [--no-sudo]
                     [--no-skel] [--podman-opt OPTION] [--debug] [--dryrun]
                     [[--] CMD]

  Run a temporary encapsule container

Available options:
  -v,--volume HOST:CONTAINER[:opts]
                           Bind mount (user's files default to selinux :z)
  -e,--env KEY[=VALUE]     Set or pass through an environment variable
  --path DIR               Prepend a directory to PATH inside the container
  -i,--init CMD            A bash snippet run when creating the encapsule
                           container
  --cap NAME               Enable a capability from the config file
  --pull                   Pull newer container image
  --user USER              Override container user [default: host/image user
                           with host UID]
  -H,--home DIR[:opts]     Mount a directory as a writable home (created if
                           missing; use DIR:O to overlay)
  --backup-home            Tarball home directory before starting
  -p,--project DIR[:opts]  Mount a (project) directory as workdir (use DIR:O to
                           overlay)
  --backup-project         Tarball project directory before starting
  -n,--name NAME           Optional container name (prefix with '^' prefix to
                           skip 'encapsule-' prefix)
  --readonly               Make the encapsule container filesystem read-only
  --no-network             Disable network access
  --no-sudo                Skip passwordless sudo setup
  --no-skel                Don't copy /etc/skel into an empty home
  --podman-opt OPTION      Pass an option directly to podman
  --debug                  Show debug output
  --dryrun                 Print the podman command instead of running it
  -h,--help                Show this help text

create command

create is similar but creates a reusable container for a project and/or temp home.

enter command

enter is used to join an existing (typically running) encapsule container.

commit command

commit saves a container as an encapsule image (encapsule-CONTAINER by default). Use -n/--name NAME for a custom image name (encapsule-NAME, or ^NAME to skip the prefix).

Examples

# Temporary isolated shell without host fs access
~$ encapsule run fedora-toolbox:44

# Mount current (project) directory path and set it as the working directory
# (also names the container after the project, e.g. encapsule-ubuntu-myproj)
~/myproj$ encapsule create ubuntu -p .

# Bind mount a volume
$ encapsule run fedora -v ~/data:/data

# create a custom "encapsule-fedora-toolbox-45" image from a toolbox container
$ encapsule commit fedora-toolbox-45

# Mount a temp "home" directory in the committed encapsule image
$ encapsule run fedora-toolbox-45 --home ~/tmp/home

# Save another encapsule image named "encapsule-dev"
$ encapsule commit --name dev fedora-toolbox-45

# Use capabilities from one's config
$ encapsule create dev --cap ssh --cap git

# Remove encapsule container
$ encapsule rm dev

# create "encapsule-my-toolbox" image
$ encapsule commit fedora-toolbox-45 --name my-toolbox

# Read-only container filesystem
$ encapsule run my-toolbox --readonly

# Set environment variables and prepend to PATH
$ encapsule run my-toolbox -e MY_VAR=hello -e LANG --path ~/.local/bin

# Run a specific command
$ encapsule run my-toolbox -- ls /

# Run a setup init scriptlet
$ encapsule run fedora-toolbox:45 -p proj --init "dnf install -y gcc make"

# Dry run: print the full podman command without running it
$ encapsule run --dryrun my-toolbox

There is a rmi command to remove an encapsule image no longer needed.

Capabilities

Capabilities define reusable groups of volumes, environment variables, PATH entries, and init commands in ~/.config/encapsule/config.toml:

[capabilities.ssh]
volumes = ["~/.ssh:~/.ssh:ro"]

[capabilities.git]
volumes = ["~/.gitconfig:ro"]

[capabilities.wayland]
env = ["WAYLAND_DISPLAY", "XDG_RUNTIME_DIR"]
volumes = ["$XDG_RUNTIME_DIR/$WAYLAND_DISPLAY"]
security_opts = ["label=disable"]

[capabilities.rust]
path = ["~/.cargo/bin"]

Each capability can define:

• volumes : list of bind mount specs
• env : list of environment variables to set or pass through
• path : list of directories to prepend to $PATH
• init : a bash snippet to run on encapsule container creation
• security_opts : list of --security-opt values passed to podman

~ and envvars are expanded in volume and path specs. If the host and container paths are the same, you can use the shorthand PATH[:opts] instead of PATH:PATH[:opts].

How it works

0. Commits the named toolbox container to an encapsule image using buildah commit.
1. Runs podman run with --userns=keep-id so you are your own user, not root
2. Drops from root with runuser if present, otherwise sudo -u (enter uses podman exec --user)
3. Sets up passwordless sudo inside the encapsule container (unless --no-sudo)
4. Bind mounts get SELinux :z (shared) labels automatically, so multiple containers can safely access the same directories
5. When -p/--project DIR is used (and --name isn’t), the container name includes the project directory’s name (e.g. encapsule-mytoolbox-myproject), so you can run the same toolbox against different projects at the same time in separate encapsule containers. Though for different project paths with the same directory name the container name will not be differentiated.

Installation

A copr repo is available for Fedora and EPEL 10:

https://copr.fedorainfracloud.org/coprs/petersen/encapsule/

Building from source

Install cabal-install and ghc.

cabal install

Build with stack

Alternatively you can build with:

stack install

Build release

To build the latest release: cabal install encapsule or stack install encapsule.

Tests

cabal test runs an hspec suite that drives the encapsule CLI (--dryrun against local images, plus an optional live run). It needs podman and skips missing images.

Default images are ubuntu:latest and fedora:latest. Override with ENCAPSULE_TEST_UBUNTU and ENCAPSULE_TEST_FEDORA. Live tests need a TTY, or set ENCAPSULE_LIVE=1 to try without one. ENCAPSULE selects a different encapsule binary.

cabal test

cabal bench times encapsule run --dryrun and a short run -- true against a local image (same env vars as tests). It requires podman and an image. It measures wall-clock time. To log timings:

cabal bench --benchmark-options '--csv /tmp/encapsule-bench.csv --time-limit 3'
# later: --baseline /tmp/encapsule-bench.csv

Runtime Requirements

• podman and buildah
• An existing (toolbox) container (created with toolbox create) or an image.
• Alternatively other non-toolbox container/images can also work.

Related projects

I already mentioned toolbox-constrained from which the initial code was derived.

There is also similarly schupfn which uses QEMU to run a toolbox container image in a VM with a direct private ssh connection.

Another somewhat related project is podenv, which “provides a declarative interface to manage containerized applications.”

For stronger sandboxing and isolation, specially network, consider using OpenShell. At some point this project might move to wrapping or supporting openshell possibly.

There is also litterbox which has quite a lot of features and though somewhat opinionated, for example like openshell also supports landlock confinement.

Disclaimer

The simple isolation provided is limited best effort and comes with no (security) warranty. Please use this tool at your own risk.

Reports, suggests, and contributions to improve the tool are very welcome.

Contribute

encapsule is at https://github.com/juhp/encapsule and distributed under the Apache-2.0 license.