Modern and extensible testing framework
|Version on this page:||1.2.3|
|LTS Haskell 20.23:||1.4.3|
|Stackage Nightly 2023-05-30:||1.4.3|
|Latest on Hackage:||1.4.3|
Module documentation for 1.2.3
Tasty is a modern testing framework for Haskell.
It lets you combine your unit tests, golden tests, QuickCheck/SmallCheck properties, and any other types of tests into a single test suite.
- Run tests in parallel but report results in a deterministic order
- Filter the tests to be run using patterns specified on the command line
- Hierarchical, colored display of test results
- Reporting of test statistics
- Acquire and release resources (sockets, temporary files etc.) that can be shared among several tests
- Extensibility: add your own test providers and ingredients (runners) above and beyond those provided
To find out what’s new, read the change log.
Here’s how your
test.hs might look like:
import Test.Tasty import Test.Tasty.SmallCheck as SC import Test.Tasty.QuickCheck as QC import Test.Tasty.HUnit import Data.List import Data.Ord main = defaultMain tests tests :: TestTree tests = testGroup "Tests" [properties, unitTests] properties :: TestTree properties = testGroup "Properties" [scProps, qcProps] scProps = testGroup "(checked by SmallCheck)" [ SC.testProperty "sort == sort . reverse" $ \list -> sort (list :: [Int]) == sort (reverse list) , SC.testProperty "Fermat's little theorem" $ \x -> ((x :: Integer)^7 - x) `mod` 7 == 0 -- the following property does not hold , SC.testProperty "Fermat's last theorem" $ \x y z n -> (n :: Integer) >= 3 SC.==> x^n + y^n /= (z^n :: Integer) ] qcProps = testGroup "(checked by QuickCheck)" [ QC.testProperty "sort == sort . reverse" $ \list -> sort (list :: [Int]) == sort (reverse list) , QC.testProperty "Fermat's little theorem" $ \x -> ((x :: Integer)^7 - x) `mod` 7 == 0 -- the following property does not hold , QC.testProperty "Fermat's last theorem" $ \x y z n -> (n :: Integer) >= 3 QC.==> x^n + y^n /= (z^n :: Integer) ] unitTests = testGroup "Unit tests" [ testCase "List comparison (different length)" $ [1, 2, 3] `compare` [1,2] @?= GT -- the following test does not hold , testCase "List comparison (same length)" $ [1, 2, 3] `compare` [1,2,2] @?= LT ]
And here is the output of the above program:
(Note that whether QuickCheck finds a counterexample to the third property is determined by chance.)
tasty is the core package. It contains basic definitions and APIs and a console runner.
In order to create a test suite, you also need to install one or more «providers» (see below).
The following providers exist:
- tasty-hunit — for unit tests (based on HUnit)
- tasty-golden — for golden tests, which are unit tests whose results are kept in files
- tasty-smallcheck — exhaustive property-based testing (based on smallcheck)
- tasty-quickcheck — for randomized property-based testing (based on QuickCheck)
- tasty-hedgehog — for randomized property-based testing (based on Hedgehog)
- tasty-hspec — for Hspec tests
- tasty-leancheck — for enumerative property-based testing (based on LeanCheck)
- tasty-program — run external program and test whether it terminates successfully
- tasty-wai - for testing wai endpoints.
It’s easy to create custom providers using the API from
Ingredients represent different actions that you can perform on your test suite. One obvious ingredient that you want to include is one that runs tests and reports the progress and results.
Another standard ingredient is one that simply prints the names of all tests.
It is possible to write custom ingredients using the API from
Some ingredients that can enhance your test suite are:
- tasty-ant-xml adds a possibility to write the test results in a machine-readable XML format, which is understood by various CI systems and IDEs
- tasty-rerun adds support for minimal test reruns by recording previous test runs and using this information to filter the test tree. For example, you can use this ingredient to only run failed tests, or only run tests that threw an exception.
- tasty-html adds the possibility to write the test results as a HTML file
- tasty-stats adds the possibility to collect statistics of the test suite in a CSV file.
- tasty-th automatically discovers tests based on the function names and generate the boilerplate code for you
- tasty-hunit-adapter converts existing HUnit test suites into tasty test suites
- tasty-discover automatically discovers your tests.
- tasty-expected-failure provides test markers for when you expect failures or wish to ignore tests.
Options allow one to customize the run-time behavior of the test suite, such as:
- mode of operation (run tests, list tests, run tests quietly etc.)
- which tests are run (see «Patterns» below)
- parameters of individual providers (like depth of search for SmallCheck)
There are two main ways to set options:
When using the standard console runner, the options can be passed on the
command line or via environment variables. To see the available options, run
your test suite with the
--help flag. The output will look something like this
(depending on which ingredients and providers the test suite uses):
% ./test --help Mmm... tasty test suite Usage: test [-p|--pattern PATTERN] [-t|--timeout DURATION] [-l|--list-tests] [-j|--num-threads NUMBER] [-q|--quiet] [--hide-successes] [--color never|always|auto] [--quickcheck-tests NUMBER] [--quickcheck-replay SEED] [--quickcheck-show-replay] [--quickcheck-max-size NUMBER] [--quickcheck-max-ratio NUMBER] [--quickcheck-verbose] [--smallcheck-depth NUMBER] Available options: -h,--help Show this help text -p,--pattern PATTERN Select only tests which satisfy a pattern or awk expression -t,--timeout DURATION Timeout for individual tests (suffixes: ms,s,m,h; default: s) -l,--list-tests Do not run the tests; just print their names -j,--num-threads NUMBER Number of threads to use for tests execution -q,--quiet Do not produce any output; indicate success only by the exit code --hide-successes Do not print tests that passed successfully --color never|always|auto When to use colored output (default: 'auto') --quickcheck-tests NUMBER Number of test cases for QuickCheck to generate --quickcheck-replay SEED Random seed to use for replaying a previous test run (use same --quickcheck-max-size) --quickcheck-show-replay Show a replay token for replaying tests --quickcheck-max-size NUMBER Size of the biggest test cases quickcheck generates --quickcheck-max-ratio NUMBER Maximum number of discared tests per successful test before giving up --quickcheck-verbose Show the generated test cases --smallcheck-depth NUMBER Depth to use for smallcheck tests
Every option can be passed via environment. To obtain the environment variable
name from the option name, replace hyphens
- with underscores
all letters, and prepend
TASTY_. For example, the environment equivalent of
Note on boolean options: by convention, boolean (“on/off”) options are specified
using a switch on the command line, for example
--quickcheck-show-replay=true. However, when
passed via the environment, the option value needs to be
If you’re using a non-console runner, please refer to its documentation to find out how to configure options during the run time.
You can also specify options in the test suite itself, using
localOption. It can be applied not only to the whole test tree, but also to
individual tests or subgroups, so that different tests can be run with
It is possible to combine run-time and compile-time options, too, by using
adjustOption. For example, make the overall testing depth configurable
during the run time, but increase or decrease it slightly for individual
This method currently doesn’t work for ingredient options, such as
--num-threads. You can set them by setting the corresponding environment
variable before calling
import Test.Tasty import System.Environment main = do setEnv "TASTY_NUM_THREADS" "1" defaultMain _
It is possible to restrict the set of executed tests using the
Tasty patterns are very powerful, but if you just want to quickly run tests containing
somewhere in their name or in the name of an enclosing test group, you can just
-p foo. If you need more power, or if that didn’t work as expected, read
A pattern is an awk expression. When the expression is evaluated, the field
is set to the outermost test group name,
$2 is set to the next test group
name, and so on up to
$NF, which is set to the test’s own name. The field
is set to all other fields concatenated using
. as a separator.
As an example, consider a test inside two test groups:
testGroup "One" [ testGroup "Two" [ testCase "Three" _ ] ]
When a pattern is evaluated for the above test case, the available fields and variables are:
$0 = "One.Two.Three" $1 = "One" $2 = "Two" $3 = "Three" NF = 3
Here are some examples of awk expressions accepted as patterns:
$2 == "Two"— select the subgroup
$2 == "Two" && $3 == "Three"— select the test or subgroup named
Threein the subgroup named
$2 == "Two" || $2 == "Twenty-two"— select two subgroups
$0 !~ /skip/or
! /skip/— select tests whose full names (including group names) do not contain the word
$NF !~ /skip/— select tests whose own names (but not group names) do not contain the word
$(NF-1) ~ /QuickCheck/— select tests whose immediate parent group name contains
As an extension to the awk expression language, if a pattern
pat contains only
letters, digits, and characters from the set
._ - (period, underscore, space, hyphen),
it is treated like
/pat/ (and therefore matched against
This is so that we can use
-p foo as a shortcut for
The only deviation from awk that you will likely notice is that Tasty
does not implement regular expression matching.
$1 ~ /foo/ means that the string
foo occurs somewhere in
case-sensitively. We want to avoid a heavy dependency of
similar libraries; however, if there is demand, regular expression support could
be added under a cabal flag.
The following operators are supported (in the order of decreasing precedence):
The following built-in functions are supported:
substr(s, m[, n])
Return the at most
n-character substring of
s that begins at
m, numbering from 1. If
n is omitted, or if
more characters than are left in the string, the length of the substring
will be limited by the length of the string
Convert the string
s to lower case.
Convert the string
s to upper case.
Return the position, in characters, numbering from 1, in string
s where the
pat occurs, or zero if it does not occur at all.
pat must be a literal, not an expression, e.g.
Return the length, in characters, of its argument taken as a string, or of the whole record,
$0, if there is no argument.
Running tests in parallel
In order to run tests in parallel, you have to do the following:
- Compile (or, more precisely, link) your test program with the
- Launch the program with
+RTS -N -RTS.
To apply timeout to individual tests, use the
option, or set the option in your test suite using the
Timeouts can be fractional, and can be optionally followed by a suffix
m (minutes), or
h (hours). When there’s no
suffix, seconds are assumed.
sets a 30 seconds timeout for each individual test.
Options controlling console output
The following options control behavior of the standard console interface:
It is possible to add custom options, too.
To do that,
- Define a datatype to represent the option, and make it an instance of
- Register the options with the
- To query the option value, use
See the Custom options in Tasty article for some examples.
Project organization and integration with Cabal
There may be several ways to organize your project. What follows is not Tasty’s requirements but my recommendations.
Tests for a library
Place your test suite sources in a dedicated subdirectory (called
here) instead of putting them among the main library sources.
The directory structure will be as follows:
my-project/ my-project.cabal src/ ... tests/ test.hs Mod1.hs Mod2.hs ...
test.hs is where your
main function is defined. The tests may be
test.hs or spread across multiple modules (
…) which are then imported by
Add the following section to the cabal file (
test-suite test default-language: Haskell2010 type: exitcode-stdio-1.0 hs-source-dirs: tests main-is: test.hs build-depends: base >= 4 && < 5 , tasty >= 0.7 -- insert the current version here , my-project -- depend on the library we're testing , ...
Tests for a program
All the above applies, except you can’t depend on the library if there’s no library. You have two options:
- Re-organize the project into a library and a program, so that both the program and the test suite depend on this new library. The library can be declared in the same cabal file.
- Add your program sources directory to the
Hs-source-dirs. Note that this will lead to double compilation (once for the program and once for the test suite).
Tasty executes tests in parallel to make them finish faster. If this parallelism is not desirable, you can declare dependencies between tests, so that one test will not start until certain other tests finish.
Dependencies are declared using the
after AllFinish "pattern" my_testswill execute the test tree
my_testsonly after all tests that match the pattern finish.
after AllSucceed "pattern" my_testswill execute the test tree
my_testsonly after all tests that match the pattern finish and only if they all succeed. If at least one dependency fails, then
my_testswill be skipped.
The relevant types are:
after :: DependencyType -- ^ whether to run the tests even if some of the dependencies fail -> String -- ^ the pattern -> TestTree -- ^ the subtree that depends on other tests -> TestTree -- ^ the subtree annotated with dependency information data DependencyType = AllSucceed | AllFinish
The pattern follows the same AWK-like syntax and semantics as described in
Patterns. There is also a variant named
after_ that accepts the
AST of the pattern instead of a textual representation.
Let’s consider some typical examples. (A note about terminology: here
by “resource” I mean anything stateful and external to the test: it could be a file,
a database record, or even a value stored in an
IORef that’s shared among
tests. The resource may or may not be managed by
Two tests, Test A and Test B, access the same shared resource and cannot be run concurrently. To achieve this, make Test A a dependency of Test B:
testGroup "Tests accessing the same resource" [ testCase "Test A" $ ... , after AllFinish "Test A" $ testCase "Test B" $ ... ]
Test A creates a resource and Test B uses that resource. Like above, we make Test A a dependency of Test B, except now we don’t want to run Test B if Test A failed because the resource may not have been set up properly. So we use
testGroup "Tests creating and using a resource" [ testCase "Test A" $ ... , after AllSucceed "Test A" $ testCase "Test B" $ ... ]
Here are some caveats to keep in mind regarding dependencies in Tasty:
If Test B depends on Test A, remember that either of the may be filtered out using the
--patternoption. Collecting the dependency info happens after filtering. Therefore, if Test A is filtered out, Test B will run unconditionally, and if Test B is filtered out, it simply won’t run.
Tasty does not currently check whether the pattern in a dependency matches anything at all, so make sure your patterns are correct and do not contain typos. Fortunately, misspecified dependencies usually lead to test failures and so can be detected that way.
Dependencies shouldn’t form a cycle, otherwise Tasty with fail with the message “Test dependencies form a loop.” A common cause of this is a test matching its own dependency pattern.
Using dependencies may introduce quadratic complexity. Specifically, resolving dependencies is O(number_of_tests × number_of_dependencies), since each pattern has to be matched against each test name. As a guideline, if you have up to 1000 tests, the overhead will be negligible, but if you have thousands of tests or more, then you probably shouldn’t have more than a few dependencies.
Additionally, it is recommended that the dependencies follow the natural order of tests, i.e. that the later tests in the test tree depend on the earlier ones and not vice versa. If the execution order mandated by the dependencies is sufficiently different from the natural order of tests in the test tree, searching for the next test to execute may also have an overhead quadratic in the number of tests.
Q: When my tests write to stdout/stderr, the output is garbled. Why is that and what do I do?
A: It is not recommended that you print anything to the console when using the console test reporter (which is the default one). See #103 for the discussion.
Some ideas on how to work around this:
- Use testCaseSteps (for tasty-hunit only).
- Use a test reporter that does not print to the console (like tasty-ant-xml).
- Write your output to files instead.
Q: Why doesn’t the
--hide-successesoption work properly? The test headings show up and/or the output appears garbled.
A: This can happen sometimes when the terminal is narrower than the output. A workaround is to disable ANSI tricks: pass
--ansi-tricks=falseon the command line or set
TASTY_ANSI_TRICKS=falsein the environment.
See issue #152.
Blog posts and other publications related to tasty. If you wrote or just found something not mentioned here, send a pull request!
- Holy Haskell Project Starter
- First time testing, also with FP Complete (tasty has been added to stackage since then)
- 24 Days of Hackage: tasty
- Resources in Tasty
- Custom options in Tasty
- Resources in Tasty (update)
- Announcing tasty-rerun
- Code testing in Haskell revisited (with Tasty)
- New patterns in tasty
- Screencast: Dynamic Test Suites in Haskell using Hspec and Tasty
- Automatically generated directories for tasty tests
Roman Cheplyaka is the primary maintainer.
Oliver Charles is the backup maintainer. Please get in touch with him if the primary maintainer cannot be reached.
- Ensure that
bracketwork as expected inside tests when the test suite is interrupted by Ctrl-C.
- Expose timed and getTime
- Add parseOptions
- Allow to disable ANSI tricks with –ansi-tricks=false
- Document and expose installSignalHandlers
- Enable colors in Emacs and other almost-ANSI-capable terminals
Make it possible to declare dependencies between tests (see the README for details)
Make tasty work with GHCJS
Fix compatibility with GHC 8.6
Fix a bug where some (mostly Asian) characters would break alignment in the terminal output
Fix a bug where
-l was still using
/ instead of
. as a field separator
NOTE: This major release contains some breaking changes to the semantics of patterns.
In the original pattern design I didn’t notice the conflict between using
a field separator and as the AWK syntax for pattern matching
The new patterns have been around for a relatively short time (5 months), so hopefully the breakage won’t be too big. I’m sorry about any problems caused by the change.
See https://github.com/feuerbach/tasty/issues/220 for the discussion.
The field separator in patterns is changed from slash (
/) to period (
.is now allowed in raw patterns.
The field separator is used to join the group names and the test name when comparing to a pattern such as
If you used
before, now you should use
if you meant “test/group
if you meant “test/group containing
foo/barin the name”.
The need for escaping the slash inside the
/.../pattern was precisely the motivation for this change.
Raw patterns (ones that are not AWK expressions) may no longer contain slashes (
is no longer allowed, and
is now parsed as an AWK expression
/foo/, whereas before it was treated as a raw pattern and converted to
The reason for this change is that
/foo/is a valid AWK expression and should be parsed as such.
Raw patterns may now contain hyphens, so e.g.
-p type-checkingnow works.
In theory this makes some valid AWK expressions (such as
NF-2) not to be parsed as such, but they are either unlikely to be useful or could also be expressed in other ways (
Several new exports, mostly for testing/debugging patterns:
TestPatternnow has a
- The constructors of
TestPatternare now exported.
parseAwkExpris introduced and can be used in ghci to see how an AWK expression is parsed. (For parsing test patterns, which include raw patterns in addition to AWK expression, use
Fix a bug where a test suite that uses resources would hang if interrupted
- Add a
safeReadBoolfunction, for case-insensitive parsing of boolean options
- Convert all tasty’s own options to case-insensitive
Adjust lower bounds for the dependencies (mtl and optparse-applicative)
- New pattern language (see the README and/or the blog post)
- Make the
Fix compatibility with GHC 8.4
Backward compat breaking revision of
that exposes the name of tests/groups.
Expose and document several of the internals of
Fix compatibility with GHC 7.4
- Make the
--quietmode more efficient on a large number of tests
- Fix a bug where a cursor would disappear if the test suite was terminated by a signal other than SIGINT.
Make filtering tests (
-p) work faster
Fix a critical bug in the quiet mode (
the exit status could be wrong or the test suite could hang.
Fix compatibility with the latest
composeReporters, a function to run multiple reporter ingredients
Fix compatibility with
regex-tdfa, which got a new maintainer.
IsTest’s specification with regard to exceptions
Use monotonic clock when measuring durations.
- Improve the docs
- Fix compatibility with GHC HEAD
- Prevent parsing non-positive number of threads via program options (#104)
- Buffer output to avoid slowdowns when printing test results (#101)
- Default to using the maximum number of available cores for test execution
Don’t output ANSI codes for the Emacs terminal emulator
Better handle the situation when there are no ingredients to run
Split the changelog into per-project changelogs
Update to optparse-applicative 0.11
- Add the
- Introduce the
- Change the types of
TestReporterto accept the total run time
consoleTestReporternow displays the timings
- Introduce the
Upgrade to optparse-applicative-0.10.
Be careful not to export the
Show (a -> b) instance, see
Hide cursor when running tests
Fix for GHC 7.9
Remove the old ‘colors’ flag description from the cabal file
Make ansi-terminal an unconditional dependency
Test.Tasty.Ingredientsis now exposed
Test.Tasty.Ingredients.Basicis added, which exports the ingredients defined in the
tastypackage. These exports should now be used instead of ones exported from
Resulttype is now structured a bit differently. Providers now should use
testFailedfunctions instead of constructing
- Add «quiet mode» (see README)
- Add «hide successes» mode (see README)
- Add short command-line options:
- Add timeout support
AppMonoidis renamed to
Traversalfor consistency with the ‘reducers’ package. Another similar wrapper,
Ap, is introduced.
- Fix a resources bug (resources were not released if the test suite was interrupted)
- The type of
launchTestTreeis changed. It now takes a continuation as an argument. This is necessary to fix the bug mentioned above.
flagCLParserto be used as the
optionCLParserimplementation for boolean options.
- Add the ability to pass options via environment
regex-posix(which is a native implementation, and as such is more portable)
foldTestTreenow takes the algebra in the form of a record rather than multiple arguments, to minimize breakage when new nodes are added or existing ones change
withResourcenow passes the IO action to get the resource to the inner test tree
- Better handling of exceptions that arise during resource creation or disposal
- Expose the
Depend on ansi-terminal >= 0.6.1. This fixes some issues with colors on Windows.
- Make it clear that only GHC 7.4+ is supported
Add a capability to acquire and release resources. See the «Resources» section
For the end users, the API is backwards-compatible.
Test runners may have to be adjusted — there is a new constructor of
and a new argument of
Print the failure description in red
Fix a bug (#25)
The big change in this release is introduction of ingredients, which is a replacement for runners. But unless you have a custom runner, this is unlikely to affect you much.
Ingredient data type has replaced the
The following functions have been renamed and possibly changed their types:
Added in this release:
- functions operating on ingredients
listingTestsingredient and its option,
NumThreads is no longer a core option, but is automatically included in the
test reporting ingredients (see its haddock).
- Proper reporting of (some) non-terminating tests (#15)
- Upgrade to optparse-applicative 0.6
- Restrict dependency versions
- Fix a bug where non-terminating test would lead to a deadlock (#15)
- Add an
Set lower bound on optparse-applicative dependency version