MIT licensed and maintained by Simon Hengel
This version can be pinned in stack with:doctest-0.16.2@sha256:2f96e9bbe9aee11b47453c82c24b3dc76cdbb8a2a7c984dfd60b4906d08adf68,6942

Module documentation for 0.16.2

Doctest: Test interactive Haskell examples

doctest is a small program, that checks examples in Haddock comments. It is similar to the popular Python module with the same name.


doctest is available from Hackage. Install it, by typing:

cabal install doctest

Make sure that Cabal’s bindir is on your PATH.

On Linux:

export PATH="$HOME/.cabal/bin:$PATH"

On Mac OS X:

export PATH="$HOME/Library/Haskell/bin:$PATH"

On Windows:

set PATH="%AppData%\cabal\bin\;%PATH%"

For more information, see the section on paths in the Cabal User Guide.


Below is a small Haskell module. The module contains a Haddock comment with some examples of interaction. The examples demonstrate how the module is supposed to be used.

module Fib where

-- | Compute Fibonacci numbers
-- Examples:
-- >>> fib 10
-- 55
-- >>> fib 5
-- 5
fib :: Int -> Int
fib 0 = 0
fib 1 = 1
fib n = fib (n - 1) + fib (n - 2)

(A comment line starting with >>> denotes an expression. All comment lines following an expression denote the result of that expression. Result is defined by what a REPL (e.g. ghci) prints to stdout and stderr when evaluating that expression.)

With doctest you may check whether the implementation satisfies the given examples, by typing:

doctest Fib.hs

You may produce Haddock documentation for that module with:

haddock -h Fib.hs -o doc/

Example groups

Examples from a single Haddock comment are grouped together and share the same scope. E.g. the following works:

-- |
-- >>> let x = 23
-- >>> x + 42
-- 65

If an example fails, subsequent examples from the same group are skipped. E.g. for

-- |
-- >>> let x = 23
-- >>> let n = x + y
-- >>> print n

print n is not tried, because let n = x + y fails (y is not in scope!).

A note on performance

By default, doctest calls :reload between each group to clear GHCi’s scope of any local definitions. This ensures that previous examples cannot influence later ones. However, it can lead to performance penalties if you are using doctest in a project with many modules. One possible remedy is to pass the --fast flag to doctest, which disables calling :reload between groups. If doctests are running too slowly, you might consider using --fast. (With the caveat that the order in which groups appear now matters!)

However, note that due to a bug on GHC 8.2.1 or later, the performance of --fast suffers significantly when combined with the --preserve-it flag (which keeps the value of GHCi’s it value between examples).

Setup code

You can put setup code in a named chunk with the name $setup. The setup code is run before each example group. If the setup code produces any errors/failures, all tests from that module are skipped.

Here is an example:

module Foo where

import Bar.Baz

-- $setup
-- >>> let x = 23 :: Int

-- |
-- >>> foo + x
-- 65
foo :: Int
foo = 42

Note that you should not place setup code inbetween the module header (module ... where) and import declarations. GHC will not be able to parse it (issue #167). It is best to place setup code right after import declarations, but due to its declarative nature you can place it anywhere inbetween top level declarations as well.

Multi-line input

GHCi supports commands which span multiple lines, and the same syntax works for doctest:

-- |
-- >>> :{
--  let
--    x = 1
--    y = 2
--  in x + y + multiline
-- :}
-- 6
multiline = 3

Note that >>> can be left off for the lines following the first: this is so that haddock does not strip leading whitespace. The expected output has whitespace stripped relative to the :}.

Some peculiarities on the ghci side mean that whitespace at the very start is lost. This breaks the example broken, since the x and y aren’t aligned from ghci’s perspective. A workaround is to avoid leading space, or add a newline such that the indentation does not matter:

{- | >>> :{
let x = 1
    y = 2
  in x + y + works
works = 3

{- | >>> :{
 let x = 1
     y = 2
  in x + y + broken
broken = 3

Multi-line output

If there are no blank lines in the output, multiple lines are handled automatically.

-- | >>> putStr "Hello\nWorld!"
-- Hello
-- World!

If however the output contains blank lines, they must be noted explicitly with <BLANKLINE>. For example,

import Data.List ( intercalate )

-- | Double-space a paragraph.
--   Examples:
--   >>> let s1 = "\"Every one of whom?\""
--   >>> let s2 = "\"Every one of whom do you think?\""
--   >>> let s3 = "\"I haven't any idea.\""
--   >>> let paragraph = unlines [s1,s2,s3]
--   >>> putStrLn $ doubleSpace paragraph
--   "Every one of whom?"
--   "Every one of whom do you think?"
--   "I haven't any idea."
doubleSpace :: String -> String
doubleSpace = (intercalate "\n\n") . lines

Matching arbitrary output

Any lines containing only three dots (...) will match one or more lines with arbitrary content. For instance,

-- |
-- >>> putStrLn "foo\nbar\nbaz"
-- foo
-- ...
-- baz

If a line contains three dots and additional content, the three dots will match anything within that line:

-- |
-- >>> putStrLn "foo bar baz"
-- foo ... baz

QuickCheck properties

Haddock (since version 2.13.0) has markup support for properties. Doctest can verify properties with QuickCheck. A simple property looks like this:

-- |
-- prop> \xs -> sort xs == (sort . sort) (xs :: [Int])

The lambda abstraction is optional and can be omitted:

-- |
-- prop> sort xs == (sort . sort) (xs :: [Int])

A complete example that uses setup code is below:

module Fib where

-- $setup
-- >>> import Control.Applicative
-- >>> import Test.QuickCheck
-- >>> newtype Small = Small Int deriving Show
-- >>> instance Arbitrary Small where arbitrary = Small . (`mod` 10) <$> arbitrary

-- | Compute Fibonacci numbers
-- The following property holds:
-- prop> \(Small n) -> fib n == fib (n + 2) - fib (n + 1)
fib :: Int -> Int
fib 0 = 0
fib 1 = 1
fib n = fib (n - 1) + fib (n - 2)

If you see an error like the following, ensure that QuickCheck is a dependency of the test-suite or executable running doctest.

    Not in scope: ‘polyQuickCheck’
    In the splice: $(polyQuickCheck (mkName "doctest_prop"))

    GHC stage restriction:
      ‘polyQuickCheck’ is used in a top-level splice or annotation,
      and must be imported, not defined locally
    In the expression: polyQuickCheck (mkName "doctest_prop")
    In the splice: $(polyQuickCheck (mkName "doctest_prop"))

Hiding examples from Haddock

You can put examples into named chunks, and not refer to them in the export list. That way they will not be part of the generated Haddock documentation, but Doctest will still find them.

-- $
-- >>> 1 + 1
-- 2

Using GHC extensions

There’s two sets of GHC extensions involved when running Doctest:

  1. The set of GHC extensions that are active when compiling the module code (excluding the doctest examples). The easiest way to specify these extensions is through LANGUAGE pragmas in your source files. (Doctest will not look at your cabal file.)
  2. The set of GHC extensions that are active when executing the Doctest examples. (These are not influenced by the LANGUAGE pragmas in the file.) The recommended way to enable extensions for Doctest examples is to switch them on like this:
-- |
-- >>> :set -XTupleSections
-- >>> fst' $ (1,) 2
-- 1
fst' :: (a, b) -> a
fst' = fst

Alternatively you can pass any GHC options to Doctest, e.g.:

doctest -XCPP Foo.hs

These options will affect both the loading of the module and the execution of the Doctest examples.

If you want to omit the information which language extensions are enabled from the Doctest examples you can use the method described in Hiding examples from Haddock, e.g.:

-- $
-- >>> :set -XTupleSections

Cabal integration

Doctest provides both, an executable and a library. The library exposes a function doctest of type:

doctest :: [String] -> IO ()

Doctest’s own main is simply:

main = getArgs >>= doctest

Consequently, it is possible to create a custom executable for a project, by passing all command-line arguments that are required for that project to doctest. A simple example looks like this:

-- file doctests.hs
import Test.DocTest
main = doctest ["-isrc", "src/Main.hs"]

And a corresponding Cabal test suite section like this:

test-suite doctests
  type:          exitcode-stdio-1.0
  ghc-options:   -threaded
  main-is:       doctests.hs
  build-depends: base, doctest >= 0.8

Doctest in the wild

You can find real world examples of Doctest being used below:

Doctest extensions

Development Build Status

Join in at #hspec on freenode.

Discuss your ideas first, ideally by opening an issue on GitHub.

Add tests for new features, and make sure that the test suite passes with your changes.

cabal configure --enable-tests && cabal build && cabal exec cabal test


  • Adam Vogt
  • Anders Persson
  • Ankit Ahuja
  • Edward Kmett
  • Hiroki Hattori
  • Joachim Breitner
  • João Cristóvão
  • Julian Arni
  • Kazu Yamamoto
  • Levent Erkok
  • Luke Murphy
  • Matvey Aksenov
  • Michael Orlitzky
  • Michael Snoyman
  • Nick Smallbone
  • Sakari Jokinen
  • Simon Hengel
  • Sönke Hahn