MIT licensed by Simon Hengel
Maintained by [email protected], Andreas Abel
This version can be pinned in stack with:doctest-0.20.1@sha256:c0e08af88e034f41673477be0350ceae69faea2db03a4c10b289fa9c20d27cbb,6856

Module documentation for 0.20.1

Doctest: Test interactive Haskell examples

doctest is a tool that checks examples and properties in Haddock comments. It is similar in spirit to the popular Python module with the same name.

Getting started

Installation

doctest is available from Hackage. Install it with:

cabal update && cabal install doctest

Make sure that Cabal’s bindir is on your PATH.

On Linux:

export PATH="$HOME/.cabal/bin:$PATH"

On Mac OS X:

export PATH="$HOME/Library/Haskell/bin:$PATH"

On Windows:

set PATH="%AppData%\cabal\bin\;%PATH%"

A basic example

Below is a small Haskell module. The module contains a Haddock comment with some examples of interaction. The examples demonstrate how the module is supposed to be used.

-- src/Fib.hs
module Fib where

-- | Compute Fibonacci numbers
--
-- Examples:
--
-- >>> fib 10
-- 55
--
-- >>> fib 5
-- 5
fib :: Int -> Int
fib 0 = 0
fib 1 = 1
fib n = fib (n - 1) + fib (n - 2)

(A comment line starting with >>> denotes an expression. All comment lines following an expression denote the result of that expression. Result is defined by what a REPL (e.g. ghci) prints to stdout and stderr when evaluating that expression.)

With doctest you can check whether the implementation satisfies the given examples:

doctest src/Fib.hs

Running doctest for a Cabal package

The easiest way to run doctest for a Cabal package is via cabal repl --with-ghc=doctest.

This doesn’t make a big difference for a simple package, but in more involved situations cabal will make sure that all dependencies are available and it will pass any required GHC options to doctest.

A simple .cabal file for Fib looks like this:

-- fib.cabal
cabal-version: 1.12

name:           fib
version:        0.0.0
build-type:     Simple

library
  build-depends: base == 4.*
  hs-source-dirs: src
  exposed-modules: Fib
  default-language: Haskell2010

With a .cabal file in place, it is possible to run doctest via cabal repl:

$ cabal repl --with-ghc=doctest
...
Examples: 2  Tried: 2  Errors: 0  Failures: 0

Notes:

  • If you use properties you need to pass --build-depends=QuickCheck and --build-depends=template-haskell to cabal repl.

  • doctest always uses the version of GHC it was compiled with. Reinstalling doctest with cabal install doctest --overwrite-policy=always before each invocation ensures that it uses the same version of GHC as is on the PATH.

  • Technically, cabal build is not necessary. cabal repl --with-ghc=doctest will build any dependencies as needed. However, it’s more robust to run cabal build first (specifically it is not a good idea to build ghc-paths with --with-ghc=doctest).

So a more robust way to call doctest is as follows:

cabal install doctest --overwrite-policy=always && cabal build && cabal repl --build-depends=QuickCheck --build-depends=template-haskell --with-ghc=doctest

(This is what you want to use on CI.)

Writing examples and properties

Example groups

Examples from a single Haddock comment are grouped together and share the same scope. E.g. the following works:

-- |
-- >>> let x = 23
-- >>> x + 42
-- 65

If an example fails, subsequent examples from the same group are skipped. E.g. for

-- |
-- >>> let x = 23
-- >>> let n = x + y
-- >>> print n

print n is skipped, because let n = x + y fails (as y is not in scope).

A note on performance

By default, doctest calls :reload between each group to clear GHCi’s scope of any local definitions. This ensures that previous examples cannot influence later ones. However, it can lead to performance penalties if you are using doctest in a project with many modules. One possible remedy is to pass the --fast flag to doctest, which disables calling :reload between groups. If doctests are running too slowly, you might consider using --fast. (With the caveat that the order in which groups appear now matters!)

However, note that due to a bug on GHC 8.2.1 or later, the performance of --fast suffers significantly when combined with the --preserve-it flag (which keeps the value of GHCi’s it value between examples).

Setup code

You can put setup code in a named chunk with the name $setup. The setup code is run before each example group. If the setup code produces any errors/failures, all tests from that module are skipped.

Here is an example:

module Foo where

import Bar.Baz

-- $setup
-- >>> let x = 23 :: Int

-- |
-- >>> foo + x
-- 65
foo :: Int
foo = 42

Note that you should not place setup code inbetween the module header (module ... where) and import declarations. GHC will not be able to parse it (issue #167). It is best to place setup code right after import declarations, but due to its declarative nature you can place it anywhere inbetween top level declarations as well.

Multi-line input

GHCi supports commands which span multiple lines, and the same syntax works for doctest:

-- |
-- >>> :{
--  let
--    x = 1
--    y = 2
--  in x + y + multiline
-- :}
-- 6
multiline = 3

Note that >>> can be left off for the lines following the first: this is so that haddock does not strip leading whitespace. The expected output has whitespace stripped relative to the :}.

Some peculiarities on the ghci side mean that whitespace at the very start is lost. This breaks the example broken, since the x and y aren’t aligned from ghci’s perspective. A workaround is to avoid leading space, or add a newline such that the indentation does not matter:

{- | >>> :{
let x = 1
    y = 2
  in x + y + works
:}
6
-}
works = 3

{- | >>> :{
 let x = 1
     y = 2
  in x + y + broken
:}
3
-}
broken = 3

Multi-line output

If there are no blank lines in the output, multiple lines are handled automatically.

-- | >>> putStr "Hello\nWorld!"
-- Hello
-- World!

If however the output contains blank lines, they must be noted explicitly with <BLANKLINE>. For example,

import Data.List ( intercalate )

-- | Double-space a paragraph.
--
--   Examples:
--
--   >>> let s1 = "\"Every one of whom?\""
--   >>> let s2 = "\"Every one of whom do you think?\""
--   >>> let s3 = "\"I haven't any idea.\""
--   >>> let paragraph = unlines [s1,s2,s3]
--   >>> putStrLn $ doubleSpace paragraph
--   "Every one of whom?"
--   <BLANKLINE>
--   "Every one of whom do you think?"
--   <BLANKLINE>
--   "I haven't any idea."
--
doubleSpace :: String -> String
doubleSpace = (intercalate "\n\n") . lines

Matching arbitrary output

Any lines containing only three dots (...) will match one or more lines with arbitrary content. For instance,

-- |
-- >>> putStrLn "foo\nbar\nbaz"
-- foo
-- ...
-- baz

If a line contains three dots and additional content, the three dots will match anything within that line:

-- |
-- >>> putStrLn "foo bar baz"
-- foo ... baz

QuickCheck properties

Haddock has markup support for properties. Doctest can verify properties with QuickCheck. A simple property looks like this:

-- |
-- prop> \xs -> sort xs == (sort . sort) (xs :: [Int])

The lambda abstraction is optional and can be omitted:

-- |
-- prop> sort xs == (sort . sort) (xs :: [Int])

A complete example that uses setup code is below:

module Fib where

-- $setup
-- >>> import Control.Applicative
-- >>> import Test.QuickCheck
-- >>> newtype Small = Small Int deriving Show
-- >>> instance Arbitrary Small where arbitrary = Small . (`mod` 10) <$> arbitrary

-- | Compute Fibonacci numbers
--
-- The following property holds:
--
-- prop> \(Small n) -> fib n == fib (n + 2) - fib (n + 1)
fib :: Int -> Int
fib 0 = 0
fib 1 = 1
fib n = fib (n - 1) + fib (n - 2)

If you see an error like the following, ensure that QuickCheck is visible to doctest (e.g. by passing --build-depends=QuickCheck to cabal repl).

<interactive>:39:3:
    Not in scope: ‘polyQuickCheck’
    In the splice: $(polyQuickCheck (mkName "doctest_prop"))

<interactive>:39:3:
    GHC stage restriction:
      ‘polyQuickCheck’ is used in a top-level splice or annotation,
      and must be imported, not defined locally
    In the expression: polyQuickCheck (mkName "doctest_prop")
    In the splice: $(polyQuickCheck (mkName "doctest_prop"))

Hiding examples from Haddock

You can put examples into named chunks, and not refer to them in the export list. That way they will not be part of the generated Haddock documentation, but Doctest will still find them.

-- $
-- >>> 1 + 1
-- 2

Using GHC extensions

There’s two sets of GHC extensions involved when running Doctest:

  1. The set of GHC extensions that are active when compiling the module code (excluding the doctest examples). The easiest way to specify these extensions is through LANGUAGE pragmas in your source files.

  2. The set of GHC extensions that are active when executing the Doctest examples. (These are not influenced by the LANGUAGE pragmas in the file.) The recommended way to enable extensions for Doctest examples is to switch them on like this:

-- |
-- >>> :set -XTupleSections
-- >>> fst' $ (1,) 2
-- 1
fst' :: (a, b) -> a
fst' = fst

Alternatively you can pass any GHC options to Doctest, e.g.:

doctest -XCPP Foo.hs

These options will affect both the loading of the module and the execution of the Doctest examples.

If you want to omit the information which language extensions are enabled from the Doctest examples you can use the method described in Hiding examples from Haddock, e.g.:

-- $
-- >>> :set -XTupleSections

Limitations

  • Doctests only works on platforms that have support for GHC’s --interactive mode (ghci).

  • Due to a GHC bug, running :set -XTemplateHaskell within ghci may unload any modules that were specified on the command-line.

    To address this doctest >= 0.19.0 does two things:

    1. Doctest always enables -XTemplateHaskell. So it is safe to use Template Haskell in examples without enabling the extension explicitly.
    2. Doctest filters out -XTemplateHaskell from single-line :set-statements. So it is still safe to include :set -XTemplateHaskell in examples for documentation purposes. It may just not work as intended in ghci due to that GHC bug.

    Doctest does not filter out -XTemplateHaskell from multi-line :set-statements. So if you e.g. use

    >>> :{
    :set -XTemplateHaskell
    :}
    

    then you are on your own.

    Note that all platforms that support --interactive also support -XTemplateHaskell. So this approach does not reduce Doctest’s platform support.

  • Modules that are rejected by haddock will not work with doctest. This can mean that doctest fails on input that is accepted by GHC (e.g. #251).

  • Doctest works best with UTF-8. If your locale is e.g. LC_ALL=C, you may want to invoke doctest with LC_ALL=C.UTF-8.

Doctest in the wild

You can find real world examples of Doctest being used below:

Development

Discuss your ideas first, ideally by opening an issue on GitHub.

Add tests for new features, and make sure that the test suite passes with your changes.

cabal build --enable-tests && cabal exec -- cabal test --test-show-details=direct

Contributors

  • Adam Vogt
  • Alan Zimmerman
  • Alexander Bernauer
  • Alexandre Esteves
  • Anders Persson
  • Andreas Abel
  • Ankit Ahuja
  • Artyom Kazak
  • Edward Kmett
  • Gabor Greif
  • Hiroki Hattori
  • Ignat Insarov
  • Jens Petersen
  • Joachim Breitner
  • John Chee
  • João Cristóvão
  • Julian Arni
  • Kazu Yamamoto
  • Leon Schoorl
  • Levent Erkok
  • Luke Murphy
  • Matvey Aksenov
  • Michael Orlitzky
  • Michael Snoyman
  • Mitchell Rosen
  • Nick Smallbone
  • Nikos Baxevanis
  • Oleg Grenrus
  • quasicomputational
  • Ryan Scott
  • Sakari Jokinen
  • Simon Hengel
  • Sönke Hahn
  • Takano Akio
  • Tamar Christina
  • Veronika Romashkina

For up-to-date list, query

git shortlog -s

Changes

Changes in 0.20.1

  • GHC 9.4 compatibility. (#382)

Changes in 0.20.0

  • Allow doctest to be invoked via cabal repl --with-ghc=doctest
  • Include ghc --info output in --info
  • Make --info output formatting consistent with GHC

Changes in 0.19.0

  • Better support for cabal v2-*

Changes in 0.18.2

  • GHC 9.2 compatibility. (#305, thanks to Ryan Scott and Matthew Pickering)

Changes in 0.18.1

  • GHC 9.0 compatibility. (#275)

Changes in 0.18

  • Don’t use unqualified references to stderr or stdout which may collide with definitions in user code. (#201)
  • Remove support for cabal-install sandboxes. They have been obsoleted in practice by Nix-style builds in cabal-install (i.e., the v2-* commands) and stack.

Changes in 0.17

  • #266:
    • doctest now annotates its internal marker string as a String, to prevent misbehaviour in OverloadedStrings environments. This has a theoretical chance of breakage; if you’re affected, please open an issue.
    • evalEcho no longer preserves it.

Changes in 0.16.3

  • Add a cursor to highlight the differing portion between the expected and actual output. (#249)
  • GHC 8.10 compatibility. (#247, #257)

Changes in 0.16.2

  • Add doctest’s necessary-for-operation options to GHC’s command line at the end, so that they over-ride anything provided by the user. (#233)
  • Allow GHC 8.8.

Changes in 0.16.1

  • Fix loading plugins in doctests. (#224)
  • Require QuickCheck 2.13.1 or newer.
  • Remove dependency on with-location

Changes in 0.16.0.1

  • Bump bounds to allow GHC 8.6. (#210)

Changes in 0.16.0

  • Output format has changed to (hopefully) be more machine consumable. (#200)

Changes in 0.15.0

  • Add --verbose for printing each test as it is run

Changes in 0.14.1

  • Add test assets to source tarball (see #189)

Changes in 0.14.0

  • GHC 8.4 compatibility.

Changes in 0.13.0

  • Add --preserve-it for allowing the it variable to be preserved between examples

Changes in 0.12.0

  • Preserve the ‘it’ variable between examples

Changes in 0.11.4

  • Add --fast, which disables running :reload between example groups

Changes in 0.11.3

  • Add --info
  • Add --no-magic

Changes in 0.11.2

  • Make ... match zero lines

Changes in 0.11.1

  • Fix an issue with Unicode output on Windows (see #149)

Changes in 0.11.0

  • Support for GHC 8.0.1-rc2

Changes in 0.10.1

  • Automatically expand directories into contained Haskell source files (thanks @snoyberg)
  • Add cabal_macros.h and autogen dir by default (thanks @snoyberg)

Changes in 0.10.0

  • Support HASKELL_PACKAGE_SANDBOXES (thanks @snoyberg)

Changes in 0.9.13

  • Add ellipsis as wildcard

Changes in 0.9.12

  • Add support for GHC 7.10

Changes in 0.9.11

  • Defaults ambiguous type variables to Integer (#74)

Changes in 0.9.10

  • Add support for the upcoming GHC 7.8 release

Changes in 0.9.9

  • Add support for multi-line statements

Changes in 0.9.8

  • Support for GHC HEAD (7.7)

Changes in 0.9.7

  • Ignore trailing whitespace when matching example output

Changes in 0.9.6

  • Fail gracefully if GHCi is not supported (#46)

Changes in 0.9.5

  • Fix a GHC panic with GHC 7.6.1 (#41)

Changes in 0.9.4

  • Respect HASKELL_PACKAGE_SANDBOX (#39)
  • Print path to ghc on –version

Changes in 0.9.3

  • Properly handle additional object files (#38)

Changes in 0.9.2

  • Add support for QuickCheck properties

Changes in 0.9.1

  • Fix an issue with GHC 7.6.1 and type families

Changes in 0.9.0

  • Add support for setup code (see README).
  • There is no distinction between example/interaction anymore. Each expression is counted as an example in the summary.

Changes in 0.8.0

  • Doctest now directly accepts arbitrary GHC options, prefixing GHC options with –optghc is no longer necessary

Changes in 0.7.0

  • Print source location for failing tests
  • Output less clutter on failing examples
  • Expose Doctest’s functionality through a very simplistic API, which can be used for cabal integration

Changes in 0.6.1

  • Fix a parser bug with CR+LF line endings

Changes in 0.6.0

  • Support for ghc-7.4
  • Doctest now comes with it’s own parser and does not depend on Haddock anymore

Changes in 0.5.2

  • Proper handling of singular/plural when printing stats
  • Improve handling of invalid command line options

Changes in 0.5.1

  • Adapted for ghc-7.2

Changes in 0.5.0

  • Print number of interactions to stderr before running tests
  • Exit with exitFailure on failed tests
  • Improve documentation
  • Give a useful error message if ghc is not executable