path
Support for well-typed paths
Version on this page: | 0.9.5 |
LTS Haskell 22.43: | 0.9.5 |
Stackage Nightly 2024-12-05: | 0.9.5 |
Latest on Hackage: | 0.9.6 |
path-0.9.5@sha256:3bdc437c4b120b90c222adf8324cbbe4fc35f7272a872dc4d003ea9292c56d1e,3273
Module documentation for 0.9.5
Path
Support for well-typed paths in Haskell.
- Motivation
- Approach
- Solution
- Implementation
- Review
- In practice
- Doing I/O
- Doing textual manipulations
- Accepting user input
- Comparing with existing path libraries
- Summary
Motivation
It was after working on a number of projects at FP Complete that use file paths in various ways. We used the system-filepath package, which was supposed to solve many path problems by being an opaque path type. It occurred to me that the same kind of bugs kept cropping up:
-
Expected a path to be absolute but it was relative, or vice-versa.
-
Expected two equivalent paths to be equal or order the same, but they did not (
/home//foo
vs/home/foo/
vs/home/bar/../foo
, etc.). -
Unpredictable behaviour with regards to concatenating paths.
-
Confusing files and directories.
-
Not knowing whether a path was a file or directory or relative or absolute based on the type alone was a drag.
All of these bugs are preventable.
Approach
My approach to problems like this is to make a type that encodes the properties I want and then make it impossible to let those invariants be broken, without compromise or backdoors to let the wrong value “slip in”. Once I have a path, I want to be able to trust it fully. This theme will be seen throughout the things I lay out below.
Solution
After having to fix bugs due to these in our software, I put my foot down and made:
-
An opaque
Path
type (a newtype wrapper aroundString
). -
Smart constructors which are very stringent in the parsing.
-
Make the parsers highly normalizing.
-
Leave equality and concatenation to basic string equality and concatenation.
-
Include relativity (absolute/relative) and type (directory/file) in the type itself.
-
Use the already cross-platform filepath package for implementation details.
Implementation
The data types
Here is the type:
newtype Path b t = Path FilePath
deriving (Data, Typeable, Generic)
The type variables are:
b
— base, the base location of the path; absolute or relative.t
— type, whether file or directory.
The base types can be filled with these:
data Abs deriving (Typeable)
data Rel deriving (Typeable)
And the type can be filled with these:
data File deriving (Typeable)
data Dir deriving (Typeable)
(Why not use data kinds like data Type = File | Dir
? Because that imposes
an extension overhead of adding {-# LANGUAGE DataKinds #-}
to every module
you might want to write out a path type in. Given that one cannot construct
paths of types other than these, via the operations in the module, it’s not
a concern for me.)
There is a conversion function to give you back the filepath:
toFilePath :: Path b t -> FilePath
toFilePath (Path l) = l
Beginning from version 0.5.3, there are type-constrained versions of
toFilePath
with the following signatures:
fromAbsDir :: Path Abs Dir -> FilePath
fromRelDir :: Path Rel Dir -> FilePath
fromAbsFile :: Path Abs File -> FilePath
fromRelFile :: Path Rel File -> FilePath
Parsers
To get a Path
value, you need to use one of the four parsers:
parseAbsDir :: MonadThrow m => FilePath -> m (Path Abs Dir)
parseRelDir :: MonadThrow m => FilePath -> m (Path Rel Dir)
parseAbsFile :: MonadThrow m => FilePath -> m (Path Abs File)
parseRelFile :: MonadThrow m => FilePath -> m (Path Rel File)
The following properties apply:
-
Absolute parsers will reject non-absolute paths.
-
The only delimiter syntax accepted is the path separator;
/
on POSIX and\
on Windows. -
Any other delimiter is rejected;
..
,~/
,/./
, etc. -
All parsers normalize into single separators:
/home//foo
→/home/foo
. -
Directory parsers always normalize with a final trailing
/
. So/home/foo
parses into the string/home/foo/
.
It was discussed briefly whether we should just have a class for parsing
rather than four separate parsing functions. In my experience so far, I have
had type errors where I wrote something like x <- parseAbsDir someAbsDirString
because x
was then passed to a place that expected a
relative directory. In this way, overloading the return value would’ve just
been accepted. So I don’t think having a class is a good idea. Being
explicit here doesn’t exactly waste our time, either.
Why are these functions in MonadThrow
? Because it means I can have it
return an Either
, or a Maybe
, if I’m in pure code, and if I’m in IO
,
and I don’t expect parsing to ever fail, I can use it in IO like this:
do x <- parseRelFile (fromCabalFileName x)
foo x
…
That’s really convenient and we take advantage of this at FP Complete a lot. The instances
Equality, ordering and printing are simply re-using the String
instances:
instance Eq (Path b t) where
(==) (Path x) (Path y) = x == y
instance Ord (Path b t) where
compare (Path x) (Path y) = compare x y
instance Show (Path b t) where
show (Path x) = show x
Which gives us for free the following equational properties:
toFilePath x == toFilePath y ≡ x == y -- Eq instance
toFilePath x `compare` toFilePath y ≡ x `compare` y -- Ord instance
toFilePath x == toFilePath y ≡ show x == show y -- Show instance
In other words, the representation and the path you get out at the end are the same. Two paths that are equal will always give you back the same thing.
Smart constructors
For when you know what a path will be at compile-time, there are constructors for that:
$(mkAbsDir "/home/chris")
$(mkRelDir "chris")
$(mkAbsFile "/home/chris/x.txt")
$(mkRelFile "chris/x.txt")
With the QuasiQuotes language extension, paths can be written as follows:
[absdir|/home/chris|]
[reldir|chris|]
[absfile|/home/chris/x.txt|]
[relfile|chris/x.txt|]
These will run at compile-time and underneath use the appropriate parser.
Overloaded strings
No IsString
instance is provided, because that has no way to statically
determine whether the path is correct, and would otherwise have to be a
partial function.
In practice I have written the wrong path format in a $(mk… "")
and been
thankful it was caught early.
Operations
There is path concatenation:
(</>) :: Path b Dir -> Path Rel t -> Path b t
Get the parent directory of a path:
parent :: Path Abs t -> Path Abs Dir
Get the filename of a file path:
filename :: Path b File -> Path Rel File
Get the directory name of a directory path:
dirname :: Path b Dir -> Path Rel Dir
Stripping the parent directory from a path:
stripProperPrefix :: MonadThrow m => Path b Dir -> Path b t -> m (Path Rel t)
Review
Let’s review my initial list of complaints and see if they’ve been satisfied.
Relative vs absolute confusion
Paths now distinguish in the type system whether they are relative or absolute. You can’t append two absolute paths, for example:
λ> [absdir|/home/chris|]</>[absdir|/home/chris|]
<interactive>:23:31-55:
Couldn't match type ‘Abs’ with ‘Rel’
The equality problem
Paths are now stringently normalized. They have to be a valid path, and they only support single path separators, and all directories are suffixed with a trailing path separator:
λ> $(mkAbsDir "/home/chris//") == $(mkAbsDir "/./home//chris")
True
λ> toFilePath $(mkAbsDir "/home/chris//") ==
toFilePath $(mkAbsDir "/./home//chris")
True
λ> ($(mkAbsDir "/home/chris//"),toFilePath $(mkAbsDir "/./home//chris"))
("/home/chris/","/home/chris/")
Unpredictable concatenation issues
Because of the stringent normalization, path concatenation, as seen above, is simply string concatenation. This is about as predictable as it can get:
λ> toFilePath $(mkAbsDir "/home/chris//")
"/home/chris/"
λ> toFilePath $(mkRelDir "foo//bar")
"foo/bar/"
λ> [absdir|/home/chris//|]</>[reldir|foo//bar|]
"/home/chris/foo/bar/"
Confusing files and directories
Now that the path type is encoded in the type system, our </>
operator
prevents improper appending:
λ> [absdir|/home/chris/|]</>[relfile|foo//bar|]
"/home/chris/foo/bar"
λ> [absfile|/home/chris|]</>[relfile|foo//bar|]
<interactive>:35:1-26:
Couldn't match type ‘File’ with ‘Dir’
Self-documentation
Now I can read the path like:
{ fooPath :: Path Rel Dir, ... }
And know that this refers to the directory relative to some other path, meaning I should be careful to consider the current directory when using this in IO, or that I’ll probably need a parent to append to it at some point.
In practice
We’ve been using this at FP Complete in a number of packages for some months
now, it’s turned out surprisingly sufficient for most of our path work with
only one bug found. We weren’t sure initially whether it would just be too
much of a pain to use, but really it’s quite acceptable given the
advantages. You can see its use all over the
stack
codebase.
Doing I/O
Currently any operations involving I/O can be done by using the existing I/O library:
doesFileExist (toFilePath fp)
readFile (toFilePath fp)
etc. This has problems with respect to accidentally running something like:
doesFileExist $(mkRelDir "foo")
But I/O is currently outside the scope of what this package solves. Once you
leave the realm of the Path
type invariants are back to your responsibility.
As with the original version of this library, we’re currently building up a
set of functions in a Path.IO
module over time that fits our real-world
use-cases. It may or may not appear in the path package eventually. It’ll
need cleaning up and considering what should really be included.
Edit: There is now
path-io
package that
complements the path
library and includes complete well-typed interface to
directory
and
temporary
. There is work
to add more generally useful functions from Stack’s Path.IO
to it and make
Stack depend on the path-io
package.
Doing textual manipulations
One problem that crops up sometimes is wanting to manipulate paths. Currently the way we do it is via the filepath library and re-parsing the path:
parseAbsFile . addExtension "/directory/path" "ext" . toFilePath
It doesn’t happen too often, in our experience, to the extent this needs to be more convenient.
Accepting user input
Sometimes you have user input that contains ../
. The solution we went with
is to have a function like resolveDir
(found in path-io
package):
resolveDir :: (MonadIO m, MonadThrow m)
=> Path Abs Dir -> FilePath -> m (Path Abs Dir)
Which will call canonicalizePath
which collapses and normalizes a path and
then we parse with regular old parseAbsDir
and we’re cooking with
gas. This and others like it might get added to the path
package.
Comparing with existing path libraries
filepath and system-filepath
The filepath package is intended as the complimentary package to be used before parsing into a Path value, and/or after printing from a Path value. The package itself contains no type-safety, instead contains a range of cross-platform textual operations. Definitely reach for this library when you want to do more involved manipulations.
The system-filepath
package is deprecated in favour of filepath
.
system-canonicalpath, canonical-filepath, directory-tree
The
system-canonicalpath
and the
canonical-filepath
packages both are a kind of subset of path
. They canonicalize a string
into an opaque path, but neither distinguish directories from files or
absolute/relative. Useful if you just want a canonical path but doesn’t do
anything else.
The directory-tree
package contains a sum type of dir/file/etc but doesn’t distinguish in its
operations relativity or path type.
pathtype
Finally, we come to a path library that path is similar to: the
pathtype
library. There are
the same types of Path Abs File
/ Path Rel Dir
, etc.
The points where this library isn’t enough for me are:
-
There is an
IsString
instance, which means people will use it, and will make mistakes. -
Paths are not normalized into a predictable format, leading to me being unsure when equality will succeed. This is the same problem I encountered in
system-filepath
. The equality function normalizes, but according to what properties I can reason about? I don’t know.
System.Path.Posix> ("/tmp//" :: Path a Dir) == ("/tmp" :: Path a Dir)
True
System.Path.Posix> ("tmp" :: Path a Dir) == ("/tmp" :: Path a Dir)
True
System.Path.Posix> ("/etc/passwd/" :: Path a b) == ("/etc/passwd" :: Path a b)
True
System.Path.Posix> ("/tmp//" :: Path Abs Dir) == ("/tmp/./" :: Path Abs Dir)
False
System.Path.Posix> ("/tmp/../" :: Path Abs Dir) == ("/" :: Path Abs Dir)
False
- Empty string should not be allowed, and introduction of
.
due to that gets weird:
System.Path.Posix> fmap getPathString (Right ("." :: Path Rel File))
Right "."
System.Path.Posix> fmap getPathString (mkPathAbsOrRel "")
Right "."
System.Path.Posix> (Right ("." :: Path Rel File)) == (mkPathAbsOrRel "")
False
System.Path.Posix> takeDirectory ("tmp" :: Path Rel Dir)
.
System.Path.Posix> (getPathString ("." :: Path Rel File) ==
getPathString ("" :: Path Rel File))
True
System.Path.Posix> (("." :: Path Rel File) == ("" :: Path Rel File))
False
-
It has functions like
<.>/addExtension
which lets you insert an arbitrary string into a path. -
Some functions let you produce nonsense (could be prevented by a stricter type), for example:
System.Path.Posix> takeFileName ("/tmp/" :: Path Abs Dir)
tmp
I’m being a bit picky here, a bit unfair. But the point is really to show
the kind of things I tried to avoid in path
. In summary, it’s just hard to
know where things can go wrong, similar to what was going on in
system-filepath
.
data-filepath
The data-filepath
is
also very similar, I discovered it after writing my own at work and was
pleased to see it’s mostly the same. The main differences are:
-
Uses
DataKinds
for the relative/absolute and file/dir distinction which as I said above is an overhead. -
Uses a GADT for the path type, which is fine. In my case I wanted to retain the original string which functions that work on the
FilePath
(String
) type already deal with well. It does change the parsing step somewhat, because it parses into segments. -
It’s more lenient at parsing (allowing
..
and trailing.
).
The API is a bit awkward to just parse a directory, requires a couple
functions to get it (going via WeakFilePath
), returning only an Either
,
and there are no functions like parent. But there’s not much to complain
about. It’s a fine library, but I didn’t feel the need to drop my own in
favor of it. Check it out and decide for yourself.
Summary
There’s a growing interest in making practical use of well-typed file path
handling. I think everyone’s wanted it for a while, but few people have
really committed to it in practice. Now that I’ve been using path
for a
while, I can’t really go back. It’ll be interesting to see what new packages
crop up in the coming year, I expect there’ll be more.